AC Breakdown Characteristics of $Ar/N_2 and Kr/N_2$Gas Mixtures

$Ar/N_2 및 Kr/N_2$혼합가스의 교류절연파괴 특성

  • Lee, Sang-Woo (Dept.of Electric Engineering, Yeungnam University) ;
  • Kim, In-Sik (Dept.of Electrical Engineering, Kyungil University) ;
  • Lee, Dong-In (Dept.of Electronics Information Engineering, Yeungnam University) ;
  • Lee, Kwang-Sik (Dept.of Electronics Information Engineering, Yeungnam University) ;
  • Kim, Lee-Kook (Dept.of Electrical Engineering, Kyungil University)
  • 이상우 (영남대 전기공학과 에너지 및 환경전자연구소) ;
  • 김인식 (경일대 전기공학과) ;
  • 이동인 (영남대 전자정보공학부) ;
  • 이광식 (영남대 전자정보공학부) ;
  • 김이국 (경일대 전기공학과)
  • Published : 2001.12.01

Abstract

In this paper, the ac breakdown characteristics of pure Ar, Kr and $N_2$ gas with gas pressure range of 58.8-137.3[kPa] under uniform and non-uniform fields were investigated, and the measured values were compared with those In Ar/$N_2$ and Kr/$N_2$ gas mixtures with pressure varying. Summarizing the experimental results, the breakdown voltages of Pure $N_2$gas, under uniform and non-uniform fields, were increased about 4.8 and 1.1 times than those of pure Ar gas, and about 4.4 and 1.2 times than those of pure Kr gas, and the ac breakdown voltage increased with the pressure increasing. The breakdown voltages of Ar/$N_2$ gas mixtures were decreased with decreasing the mixture ratio of Pure $N_2$ gas. In case of Ar(85%)/$N_2$ (15%) and Ar(70%)/$N_2$ (30%) gas mixtures comparing to the pure Ar gas, the breakdown voltages under uniform field were increased about 1.8 and 2.2 times, and under non-uniform field were increased about 1.1 and 1.3 times at the pressure of 101.3[kPa]. Also, in case of Kr(85%)/$N_2$ (15%) and Kr(70%)/$N_2$ (30%) gas mixtures comparing to the pure Kr gas, the breakdown voltages under uniform field were increased about 1.7 and 2.0 times, and under non-uniform field were increased about 1.0 and 1.2 times. Corona inception voltage of Kr(70%)/$N_2$(30%) gas mixtures under non-uniform fields were increased about 1.28 times than those of Ar(70%)/$N_2$ (30%) gas mixtures. In case of practical incandescent lamps, luminous and lifetime of Kr(70%)/$N_2$ (30%) gas mixtures were increased about 1.15 and 1.21 times than those of Ar(70%)/$N_2$ (30%) gas mixtures.

Keywords

References

  1. W. E. Thouret, R. Kaufman and J. W. Orlando, 'Energy and cost saving Krypton filled incandescent lamps', Journal of IES Tran. pp. 188-197, 1975
  2. I. Amdur and E. A. Mason, 'Properties of Gases at Very High Temperatures', The Physics of Fluids, Vol. 1, No. 5, pp. 370-383, 1958 https://doi.org/10.1063/1.1724353
  3. Richard H. Clapp, 'Thermionic Emission in gas-filled incandescent lamps', Illuminating Engineering, pp. 357-362, 1950
  4. J. R. Coaton, C. Eng., M. I. E. E. and L. Inst. P., 'The optimum operating gas pressure for incandescent tungsten filament lamps', Lighting Research and Technology, Vol. 1, No. 2, pp. 98-103, 1969
  5. R. C. Koo, L. J. Parascandola and J. Shurgan 'Pressure Effects of the Fill Gas on the Filament Life of an Incandescent Lamp', Journal of IES Tran., pp. 317-322, 1974
  6. G. Bergmann and P. Gerthsen, 'Electrical breakdown in gas-filled incandescent lamps', Lighting Research and Technology, Vol. 4, No. 3, pp. 159-165, 1972
  7. 이상우, 김이국, 김인식, 이동인, 이광식, '$Ar/N_2 $$Kr/N_2$ 혼합 가스의 교류절연파괴 특성', 01 대한전기학회 하계학술대회 논문집, pp. 1744-1746, 2001.7.18-20