저압 시스템에서 비선형 부하의 사용에 따른 전류 고조파 해석 및 측정

Analysis and Measurement of Current Harmonics Due to Non-linear Load in Low Voltage System

  • Kim, Jong-Gyeom (Dept.of Electrical, Wonju National College) ;
  • Lee, Eun-Ung (Dept.of Electronics Engineering, Chungnam National University)
  • 발행 : 2001.12.01

초록

The ever increasing density of adjustable speed drives(ASD) device with non-linear operating characteristics has been to put tremendous harmonic stress on end user's electrical application. All ASD controllers which employ solid state power devices cause harmonic currents in the source side line. This paper describes harmonic problems for use of ASD. In order to investigate the effect of harmonics caused by using of nonlinear load at the low voltage system, we fixed up simple load model and measured the voltage and current waveforms. Measurement results show that additional operation of linear load at the parallel bus with nonlinear load such as ASD is helpful to the reduction of harmonic influence.

키워드

참고문헌

  1. 김종겸, 이은웅, 이동주, '인버터 스위칭에 의한 가변속 구동장치의 전원측 및 부하측 고조파 해석과 저감방안', 대한전기학회 논문지, 제47권, 8호, pp.1123-1128, 1998.8
  2. David D.Shipp et al., 'Power Quality and Line Considerings for Variable Speed AC Drives', IEEE Trans. on IAS, vol.32, no.2, pp.403-410, 1996, Mar/April
  3. 김종겸, 이은웅, '유도전동기의 가변속 구동장치의 인버터 종류에 따른 고조파 발생과 그 영향', 대한전기학회 논문지, 제47권, 7호, pp.906-913, 1998.7
  4. Robert A.Hanna,'Harmonics and Technical Barriers in Adjustable Speed Drives', IEEE Trans. on IAS, vol.25, no.5, pp.894-900, 1989, Sep/Oct https://doi.org/10.1109/28.41255
  5. IEEE Std 519-1992, 'IEEE Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems',IEEE April 12, 1993
  6. 日本電氣學會技術報告書, '工場.ビルにおける電源品質確保の現狀と對策', 第581號, 1996.4
  7. Thomas et al.,'Application Considerings for PWM Inverter-fed Low-voltage Induction Motors', IEEE Trans. on IAS, vol.30, no.2, pp.286-293, 1994, Mar/April https://doi.org/10.1109/28.287532
  8. W. Edward Reid, 'Power Quality Issues-Standard and Guidelines', IEEE Trans. on IAS, vol.32, no.3, pp.625-632, 1996, May/June
  9. MathCAD User's Guide, 1996