DOI QR코드

DOI QR Code

Experimental Study on Segregated Layers of Materials and Compressive Strength of Concrete for Pretensioned Spun High Strength Concrete Pile

PHC 파일의 압축강도와 재료분리층에 대한 실험연구

  • Published : 2001.02.01

Abstract

Pretensioned spun high strength concrete (PHC) pile has to be quality-controlled and provided an adequate concrete cover to assure high load carrying capacity, impact resistance, economy, and durability. During spun pre-casting, the pile section is divided into several segregated layers such as laitance, paste, mortar, and concrete layers. Greater the thickness of segregated layers, more difficult it is to guarantee the capacity and the durability of PHC pile. The experimental study was performed to investigate the effects of centrifugal condition on the segregated layers of materials and the compressive strength of concrete for PHC pile. The considering factors in the test were centrifugal time and magnitude of centrifugal force. These factors have been found to have greater influence on the segregation than the concrete strength. The moderate centrifugal condition has to be considered to maintain quality assurance in the production of PHC pile, especially to provide the adequate concrete cover over its tendons.

PHC 파일은 높은 재하능력과 충격저항 그리고 경제성 및 내구성이 우수하지만 제품 제작시 프리스트레스 텐던이 적절한 콘크리트 덮개를 확보하여야 하며 엄격한 콘크리트 덮개를 확보하여야 하며 엄격한 품질관리가 요구된다. 원심 성형시 파일단면이 시멘트풀, 모르타르 층으로 분리되면 프리스트레스 텐던의 덮개를 충분히 확보하기 어려워 파일의 운반, 야적 및 항타시 발생하는 하중효과에 의해 균열이 발생할 수 있으며, 텐던의 부식을 유발할 수 있다. 본 연구에서는 프르텐션방식 원심력 고강도콘크리트 파일 생산시 원심력콘크리트의 원심조건이 파일의 재료분리층과 압축강도에 미치는 영향을 연구하기 위해 실험을 수행하였다. 실험결과에 의하면, 재료분리는 파일의 강도에 큰 영향을 주지는 않으나 원심력 크기 및 원심시간에 따라 재료분리층의 두께 변화가 심하여, 특히 고속의 원심 성형이 파일의 강도를 크게 하는 반면 재료분리도 크게 발생함을 알 수 있다. PHC 파일의 경우 재료분리가 크면 프리스트레싱 텐던의 피복두께 감소로 인해 부착력 감소, 텐던 주변의 종균열 발생, 내구성저하를 가져오고 또한, 텐던의 처짐, 비대칭 배치에 의해 불필요한 응력발생시 횡균열 발생이 가능하므로 재료분리가 적은 최적의 원심력, 원심시간결정은 중요한 것으로 보인다.

Keywords

References

  1. 한국콘크리트학회지 v.8 no.1 콘크리트 공장제품 개발동향 및 생산현황 -원심력콘크리트공장제품의 제조공법과 생산현황 류천
  2. 한국콘크리트학회지 v.6 no.6 프리텐션 방식 원심력 고강도 콘크리트 파일 정용
  3. 한국콘크리트학회지 v.8 no.1 콘크리트 공장제품 개발동향 및 생산 현황 - 국내 콘크리트 공장제품의 개발동향 정재동;김원기
  4. セメソト技術情報 v.21 遠心力固め效果に關する硏究 西林外
  5. 한국공업규격 KS F 4036 (프리텐션 방식 원심력 고강도 콘크리트말뚝)
  6. 한국공업규격 KS F 4403 (원심력 철근 콘크리트관)
  7. 한국공업규격 KS F 2454 (원심력으로 다져진 콘크리트의 압축강도 시험방법)
  8. 한국콘크리트학회 학술발표회 논문집 v.12 no.1 PHC 파일의 재료분리층에 대한 실험연구 이성로;강성수