Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

A Study on the Development of In-Processor Dressing Lapping Wheel and its Evaluation of Machining Characteristics

연속 전해드레싱용 래핑숫돌 개발 및 성능평가

  • 최재영 (부산대학교 정밀정형부) ;
  • 이은상 (인하대학교 기계공학부) ;
  • 송지복 (부산대학교 기계기술연구소)
  • Published : 2001.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Application of ceramics, carbide, ferrite has grown considerably due to their mechanical properties such as high degree hardness, chemical stability, super wear resistance. Despite these characters, the use of advanced material has not increased because of poor machinability. The application of metal bonded wheel was proposed. But it is difficult that metal bond wheel can be dressed. Recently, to solve this problem, the technology of in-process electrolytic dressing is developed. This method need wheel for electrolytic dressing, power supply and electrolyte. The aim of this study is development of CIB-D wheel for electrolytic and its evaluation of electrolytic characteristics, and achieve ultra-precision lapping of carbide, optic glass.

Keywords

References

  1. Matsuo.T, Okamura, 'Wear Characteristic of General and Superhard Abrasive Grain against Various Hard Materials,' Annals of the CIRP, Vol. 30, pp. 233-237, 1981
  2. E.S.Lee, J.D.Kim, 'A Study on the Analysis of Grinding Mechanism and Development of Dressing System by using Optimum In-Process elecrolytic Dressing,' Int.J.Mach.Tools.Manufact., Vol. 37, No. 12, pp. 1673-1681, 1997 https://doi.org/10.1016/S0890-6955(97)00030-8
  3. N.Itoh, H.Ohmori, 'Finishing Characteristice of ELID-lap grinding Using Ultra Fine Grain Lapping Wheel,' International Journal of JSPE, Vol. 30, pp. 305-308, 1997
  4. US Patent, 'Apparatus and Method for Mirror Surface Grinding and Grinding Wheel Therefore,' Patent Number 5,639,363
  5. 최재영, 이은상, 송지복, '연속 전해드레싱용 래핑 지석의 제작 및 전해 특성 평가,' 한국정밀공학회 춘계학술대회집 pp. 914-917, 2000
  6. H. Ohmori, 'Electrolytic In-Process Dressing(ELID) Grinding for Ultraprecision Mirror Surface Machining,' International Journal of JSPE, Vol. 26, No. 4, pp. 273-280, 1992