인가 바이어스 조건이 전기화학적 식각정지 특성에 미치는 영향

Effects of Applied Bias Conditions on Electrochemical Etch-stop Characteristics

  • 정귀상 (동서대학교 정보시스템공학부 메카트로닉스전공) ;
  • 강경두 (동서대학교 정보시스템공학부 메카트로닉스전공) ;
  • 김태송 (KIST 마이크로시스템연구센터) ;
  • 이원재 (KERI 전자기소자연구그룹) ;
  • 송재성 (KERI 전자기소자연구그룹)
  • 발행 : 2001.04.01

초록

This paper describes the effects of applied bias conditions on electrochemical etch-stop characteristics. THere are a number of key issues such as diode leakage and ohmic losses which arise when applying the conventional 3-electrochemical etch-stop to fabricated some of he MEMS(microelectro mechanical system) and SOI(Si-on-insulator) structures which employ SDB(Si-wafer direct bonding). This work allows to perform anin situ diagnostic to predict whether or not an electrochemical etch-stop would fail due to diode-leakage-induced premature passivation. In addition, it presents technology which takes into account the effects of ohmic losses and allows to calculate the appropriate bias necessary to obtain a successful electrochemical etch-stop.

키워드

참고문헌

  1. Sensor & Actuators A v.55 Process for inplan and out-of-plane single-crystal-silicon thermal microactuators J. Mark Noworolski(et. al.)
  2. Sensor & Actuators A v.61 Mechanical sensors based on laser-recrystallized SOI structures A. Druzhinin(et. al.)
  3. Sensor & Materials v.3 Application of Si-wafer direct bonding to high-temperature integrated pressure sensors G. S. Chung(et. al.)
  4. Sensor & Materials v.3 Wafer fusion bonding:characteristics of the bond quality C. Harendt(et. al.)
  5. Sensor & Actuators A v.53 A capacitive accelerometr using SDB-SOI structure Y. Matsumoto(et. al.)
  6. Sensor & Actuators A v.48 Fabrication and characterization of PZT thin-film vibrators for micromotors P. Muralt(et. al.)
  7. 5th Int. Workshop on Future Electronics Devices A computer control polishing system for silicon-on-insulator(SOI) A. Yamada(et. al.)
  8. J. KIEEME v.13 no.5 The fabrication of SDB SOI substrate by electrochemical etch-stop G. S. Chung(et. al.)
  9. IEEE Solid-State Sensors & Actuators Workshop An investigation of the electrochemical etching of (100) silicon in CsOH and KOH V. M. Mcneil(et. al.)
  10. J. Korea Sensors Society v.7 A study on electrochemical etch-stop in TMAH/IPA/pyrazine solutions G. s. Chung(et. al.)
  11. Sensors & Materials v.4 Electrochemical etch-stop charactertistics of TMAH/IPA/pyrazine solutions G. S. Chung(et. al.)