수직형 소형정미기의 벼 도정 특성 -주축회전수, 롤러의 세라믹코팅길이, 이송스크루 피치의 최적 설계조건에 대하여-

Milling Characteristics of Vertical Small Scale Milling Machine for the Rough Rice -Optimum design conditions of main spindle speed, ceramic coating length of roller and feed screw pitch-

  • 발행 : 2001.04.01

초록

This research was carried out to examine the optimum design conditions of a vertical small-scale milling machine where the rough rice is processed directly into the white rice in one pass. Effects of the main spindle speed, feed screw pitch and ceramic coating length of the roller on various milling characteristics such as white rice processing capacity, electric energy consumption, rice temperature increase, broken rice ratio, moisture reduction, outlet force and crack ratio increase were studied. The results are as follows. 1. The maximum white rice processing capacity and the lowest crack ratio increase, were obtained from a machine with specification: main spindle speed of 970rpm having a feed screw pitch of 19㎜. 2. The minimum electric energy consumption was obtained with the main spindle speeds of 900 and 970rpm respectively having a feed screw pitch of 19㎜. 3. The rice temperature was increased as the feed screw pitch decreased and the main spindle speed increased. 4. Broken rice ratio was relatively low with the range of 0.8∼1.3%. 5. Moisture content loss was with the range of 0.05∼0.4%. 6. The highest outlet force was 0.72kg$\_$f/ with 900rpm of the main spindle speed and 19㎜ of the feed screw pitch and the lowest outlet force was 0.18∼0.34kg$\_$f/ with 970rpm of the main spindle speed and 16㎜ of the feed screw pitch. 7. The optimum design conditions for the vertical small-scale milling machine were obtained at 970rpm of the main spindle speed, 19㎜ of the feed screw pitch and 20㎜ of the ceramics coating length.

키워드

참고문헌

  1. Proceedings of the KSAM 1999 Summer Conference v.4 no.2 Development of One-Pass Rice Whitener with Ceramics Blades Roller Cho, N.H.;S.M. Choi;J.R. Park;Y.O. Cha;Y.K. Cho;Y.H. Kim
  2. Proceedings of the KSAM 2001 Winter Conference v.6 no.1 Milling Characteristics of Vertical Type Small Scale Milling Machine Yon, K.S.;S.C. Cho;C.S. Han
  3. Memoirs of the Faculty of Agri. v.17 no.1 Rice Milling, and Quality and Taste of Milled Rice Milling Characteristics Kawamura;Shuso
  4. 96 농협미곡종합처리장 설계기준 고학균(외8인)
  5. 농림수산통계연보 농림부
  6. 米穀綜合處理場 理論과 實務 博虎錫(外5人)
  7. 응용 다변량분석 -이론과 SAS활용- 성웅현
  8. 日本農業機械學會誌 v.37 no.3 毅物の含水率測定方法基準についての提案 山下律也