초록
절취암의 물량산정과 사석의 절취 효율성을 판단하기 위한 목적으로 욕망산 인근지역의 지반조사를 실시하였다. 조사지역은 경상분지 동남부의 지질구조를 지배하는 양산단층대의 말단에 위치하여 안산암질암, 유문암질암 등의 화산암류와 이를 관입하고 있는 화강암으로 구성되어 있으며, 북북동-남남서 방향의 우수향 주향이동단층에 의해 규제되고 있다. 단층들은 분포된 절리의 간격과 빈도수 그리고 절리면 압축강도에 직접적인 영향을 끼치고 있다. 절리빈도는 단층면 인접지역에서 최대치를 나타내고 단층에서 멀어짐에 따라 감소된다. 지질조사를 기초로하여 구조도를 작성하고 이를 활용한 채취물량의 산정 결과 현장의 공사에 필요한 암편의 최소 크기를 고려할 때 채취 물량은 암반(기반암)체적의 61%인 4,018,000m$^3$이며, 표토와 풍화암이 포함된 욕망산 체적의 48%에 해당된다.
Structural and geological engineering properties of the rock mass distributed in the Yokmang mountain area were investigated to detenninc the usable cut-out volume and quarrying efficiency. The study area is located in the southern tip of the Yangsan fault system which controls the geological structure of the Kvungsang basin. As a result, the study area is mainly composed of andesicic. rhyolitic. and granitic rocks of the Cretaceous Kyungsang Supergroup and a series of right-handed strike-slip faults is developed along NNE-SSW direction. These regional faults significantly affect the spatial and meclwnical characteristics of joints such as spacing, frequency, and compressive strength. The joint frequency is highest along the fault zones and decreases toward the remote region. Based on the geological information obtained from the field survey, the detailed structure of the Yokmang mountain was analyzed and the volume of the rock mass was assessed. Considering the minimum rock block size required for the construction of a coastal dumping site, potential cut-out volume is then estimated to be 4,018,000m$^3$ the volume % of which is 48% of Yokmang mountain including the soil and weathered rock and 61% of the unweathered rock mass.