초록
본 연구에서는 금정산 불국사화강암지역의 19개 시추공(직경 3" 6개공과 직경 6" 13개공)에서 순간충격 시험을 실시하고, 세 가지 순간충격시험방법(Cooper-Bredehoeft-Papadopulos법, Hvorslev법, Bouwer & Rice법)으로 수리적 매개변수들을 결정하였다. 각 시험공의 수리적 특성은 시추코어자료와 연계하여 평가하였다. 연구지역을 네 개의 소구역으로 나누어 각 구역에 대한 수리적 매개변수의 차이도 비교하였다. 또한, 세 가지 순간충격시험분석으로 구해진 수리상수들간의 관련성을 검토하였다. 슬러그의 주입과 회수에 의해서 발생하는 수리전도도의 차이는 시험공 주변의 투수성 균열의 분포와 슬러그의 압력변화에서 발생하는 세립질 물질의 교란 및 침전에서 유래하는 것으로 판단된다. 세 가지 순간충격시험분석으로 구한 수리전도도값은 $10^{-8}$~$10^{-5}$m/sec의 범위를 보이며, 평균값은 $10^{-7}$~$10^{-5}$m/s의 범위를 보인다. 또한, 투수량계수는 $10^{-7}$~$10^{-5}$$m^2$/sec의 범위를 보인다. Cooper-Bredehoeft-Papadopulos(C-B-P)법, Hvorslev법, Bouwer & Rice법으로 구한 평균 수리전도도를 서로 비교하면, Hvorslev법으로 구한 수리전도도가 가장 크고, 다음으로는 Bouwer & Rice법, C-B-P법으로 나타난다.
This study is aimed for estimating hydraulic parameters using the Cooper-Bredehoeft-Papadopulos, the Hvorslev, and the Bouwer & Rice methods at nineteen test holes in Me. Geumjeong area composed of Bulguksa granites, and for characterizing hydraulic properties at the test holes with relatioll to drill core data. The relation among hydraulic Dammeters obtained by the three methods is also considered. The study area is divided into four sub-areas to consider the hydraulic characteristics. The difference of hydraulic conductivity estimates between the injection and the withdrawal slug test may be due to penncable fracture distlibutions around the test hole and/or the disturbance of fine mateIials in the fractures induced by the pressure variation due to different mechanisms of test initiation. The hydraulic conductivity estimates detennined by the Cooper-Bredehoeft-Papadopulos, the Hvorslev and the Bouwer & Rice methods ranges from 10$^{-8}$ to lO$^{-5}$m/sec, and the ranges of average values are from 10$^{-7}$ to 10$^{-6}$m/sec. Also, the transmissivity ranges from 10$^{-7}$ to 10$^{-5}$$m^2$/sec. Comparing average hydraulic conductivity by the Cooper-Bredehoeft-Papadopulos, the Hvorslev and the Bouwer & Rice methods, by the Hvorslev method has the highest values, then the Bouwer & Rice method, and the Cooper-Bredehoeft-Papadopulos method has the lowest.