References
- Darlow, M. S., 1987, 'Balancing of High Speed Machinery: Theory, Method, and Experimental Results,' Mechanical Systems and Signal Processing, Vol. 1, No. 1, pp. 105-134. https://doi.org/10.1016/0888-3270(87)90087-2
- Ehrich, F. F., 1992. Handbook of Rotor Dynamics, McGraw-Hill, New-York.
- Flack, R. D.et al., 1982, 'Comparison of the Unbalance Responses of Jeffcott Rotors with Shaft Bow and Shaft Runouts,' ASME Journal of Mechanical Design, Vol. 104, No. 2, pp. 318-328.
- Hong, S. W. and Park, J. H., 1997, 'An Efficient Method for the Unblaance Response Analysis of Rotor-Bearing Systems,' Journal of Sound and Vibration, Vol. 200, No. 4, pp. 491.-504. https://doi.org/10.1006/jsvi.1996.0773
- Jei, Y. G. Kim, J. S. Jung, S. Y. Hong, S. W., 1999. 'A Lateral Vebration Damper Using Leaf Springs, Trans. KSME A, Vol. 22, No. 4, 843-858.
- Kim, B. O. Kim, B. K. Kim YC., 1999, 'An Experimental Study on the Dynamic Characteristics of a Shaft with Initial Deflection,' Trans. KSAE, Vol. 7, No. 3, 178-184.
- Lee, C. W., and Hong, S. W., 1989, 'Identification of Bearing Dynamic Coefficients by Unbalance Response Mesurements,' Proceedings of the Institution of Mechanical Engineering Science, Vol. 203C, pp. 93-101. https://doi.org/10.1243/PIME_PROC_1989_203_092_02
- Nocholas, J. C., et al., 1976. 'Effect of Residual Shaft Bow on Unbalance Response and Balancing of a Single Mass Flexible Rotor: Part I- Unbalance Response,' ASME Journal of Engineering for Power, Vol. 98, No. 2, pp. 171-181.
- Nocholas, J. C. et al., 1976, 'Effect of Residual Shaft Bow on Unbalance Response and Balancing of a Single Mass Flexible Rotor: Part Ⅱ-Balancing,' ASME Journal of Engineering for Power, Vol. 98, No. 2, pp. 182-189.
- Shiau, T. N. and Lee, E. K., 1989, 'The Residual Shaft Bow Effect on Dynamic Response of the Simply Supported Rotor with Disk Skew and Mass Unbalances,' ASME Journal of Vibrations, Acoustics,
- Someya, T., 1988, Journal Bearing Databook, Spring-Verlag.