Supersonic Jet Noise Control via Trailing Edge Modifications

  • Kim, Jin-Hwa (Department of Mechanical Engineering, Inha University) ;
  • Lee, Seungbae (Department of Mechanical Engineering, Inha University)
  • 발행 : 2001.08.01

초록

Various experimental data, including mixing areas, cross correlation factors, surface flow patterns on nozzle walls, and far field noise spectra, was used to draw a noise control mechanism in a supersonic jet. In the underexpanded case, mixing of the jet air with ambient air was significantly enhanced as presented before, and mixing noise was also dramatically reduced. Screech tones, in the overexpanded case, were effectively suppressed by trailing edge modifications, although mixing enhancement was not noticeable. From mixing and noise performance of nozzles with modified trailing edges, enhancing mixing through streamwise vortices seems an effective way to reduce mixing noise in the underexpanded flow regime. However, screech tones in the overespanded flow regime is well controlled or suppressed by making shock cells and/or spanwise large scale structures irregular and/or less organized by a proper selection of trailing edges. The noise field in the overexpanded flow regime was greatly affected by the symmetricity of the nozzle exit geometry. In the underexpanded flow regime, the effects of the symmetricity of the nozzle exit on mixing were negligible.

키워드

참고문헌

  1. Gruber, M. R. and Nejad, A. S., 1997, 'Compressibility Effects in Supersonic Transverse Injection Flowfields,' Phy. Fluids, Vol. 9, No. 5, pp. 1448-1461 https://doi.org/10.1063/1.869257
  2. Kerechanin Ⅱ , C. W., Samimy, M., Kim , J.-H., 2001, 'Effects of Nozzle Trailing Edge Modifications on Noise Radiation in a Supersonic Rectangular Jet,' AIAA Journal, Vol. 39, No. 6, 1065-1070
  3. Kim, J.-H., 1998, An Experimental Study of Mixing and Noise in a Supersonic Rectangular Jet with Modified Trailing Edges, Ph. D. Dissertation, Mechanical Engineering, The Ohio State University
  4. Kim, J.-H and Samimy, M., 1999, 'Mixing Enhancement Via Nozzle Trailing Edge Modifications in a High Speed Rectangular Jet,' Phys. Fluids, Vol. 11, No. 9, 2731-2742 https://doi.org/10.1063/1.870132
  5. Kim, J. H. and Samimy, M., 2000, 'On Mixing Enhancement via Nozzle Trailing Edge Modifications in High Speed Jets,' AIAA Journal, Vol. 38, No. 5, 935-937 https://doi.org/10.1063/1.870132
  6. Messersmith, N. L. and Dutton, J. C., 1996, 'Characteristic Feature of Large Structures in Compressible Mixing Layers,' AIAA J., Vol. 34, No. 9, 1814-1821
  7. Raman, G., 1997, 'Screech Tones from Rectangular Jets with Spanwise Oblique Shock-Cell Structures,' Journal of Fluid Mechanics, Vol. 330, 141-68 https://doi.org/10.1017/S0022112096003801
  8. Samimy, M., Kim, J.-H., Clancy, P. S., and Martens, S., 1998, 'Passive Control of Supersonic Rectangular Jets Via Nozzle Trailing Edge Modifications,' AIAA J., 36, 1230-9
  9. Samimy, M., Zaman, K. B. M. Q., and Reeder, M. F., 1993, 'Effect of Tabs on the Flow and Noise Field of an Axisymmetric Jet,' AIAA J., Vol. 31, No. 4, 609-619
  10. Settles, G. S. and Teng, H.-Y., 1983, 'Flow Visualization Methods for Separated Three Dimensional Shock Wave/Turbulent Boundary Layer Interactions,' AIAA J., Vol. 21, 390-397
  11. Zaman, K. B. M. Q., Samimym, M., and Reeder M. F., 1994, 'Control of an Axisymmetric Jet Using Vortex Generators,' Phys. Fluids, Vol. 6, 778-93 https://doi.org/10.1063/1.868316