참고문헌
- Bai, C, 1996, Modeling of Spray Impingement Processes, Ph. D Thesis, Department of Mechanical Engineering, imperial College of Science, Technology & Medicine, University of London
- Bai, C and Gosman, A. D., 1995, 'Development of Methodology for Spray Impingement Simulation,' SAE950283
- Foucart, H., Habchi, C, LeCoz, J. F., and Baritaud, T., 1998, 'Development of a Three Dimensional Model of Wall Fuel Liquid Film for Internal Combustion Engines,' SAE980133
- Gonzalez, M. A., Borman, G. L. and Reitz, R. D., 1991, 'A Study of Diesel Cold Starting using Both Cycle Analysis and Multidimensional Calculations,' SAE910180
- Katsura, N., Saito, M., Senda, J. and Fujimoto, H., 1989, 'Characteristics of a Diesel Spray Impinging on a Flat Wall,' SAE890264
- Lee, S. H., 1999, Development of a New Model and Heat Transfer Analysis of Impinging Diesel Sprays on a Wall, Ph D. Thesis, Department of Mechanical Engineering, Chung-Ang Univer-isity
- Lee, S. H. and Ryou, H. S, 2000a, 'Modeling of Diesel Spray Impingement on a Flat Wall,' KSME International Journal, Vol. 14, No., 7, pp. 796-806
- Lee, S. H. and Ryou, H. S., 2000b, 'Comparison of Spray/Wall Impingement Models with Experimental Data,' Journal of Propulsion and Power, Vol. 16, No. 6, pp. 939-945
- Mundo, C, Sommerfeld, M. and Tropea, C, 1995, 'Droplet-Wall Collisions : Experimental Studies of the Deformation and Breakup Process,' International Journal of Multiphase Flow, Vol. 21, pp. 151-173 https://doi.org/10.1016/0301-9322(94)00069-V
- Mundo, C, Sommerfeld, M. and Tropea, C, 1998, 'On the Modeling of Liquid Sprays Impinging on Surfaces,' Atomization and Sprays, Vol. 8, pp. 625-652
- Naber, J. D. and Reitz, R. D., 1988, 'Modeling Engine Spray/Wall Impingement,' SAE880107
- Naber, J. D. and Farrell, P., 1993, 'Hydrodynamics of Droplet Impingement on a Heated Surface,' SAE930919
- Nagaoka, M., Kawazoe, H. and Nomura, N., 1994, 'Modeling Fuel Spray Impingement on a Hot Wall for Gasoline Engines,' SAE940525
- O'Rourke, P. J., 1981, Collective Drop Effects on Vaporizing Liquid Sprays, Ph. D. Thesis, Princeton University
- Park, K., 1994, Development of a Non-Orthogonal-Grid Computer Code for the Optimization of Direct-Injection Diesel Engine Combustion Chamber Shapes, Ph. D. Thesis, UMIST, UK
- Reitz, R. D. and Diwakar, R., 1987, 'Structure of High-Pressure Fuel Sprays,' SAE870598
- Reynolds, W. C., 1980, Modeling of Fluid Motions in Engines-an Introductory Overview, in Combustion Modeling in Reciprocating Engines, ed. J. N. Mattavi and C. A. Amann, Plenum Press, NY
- Saito, A., Kawamura, K., Watanabe, S., Taka-hashi, T., and Tuzuki, N., 1993, Analysis of Impinging Spray Characteristics under High-Pressure Fuel Injection (1st Report, Measurements of Impinging Spray Characteristics), Transaction of Japanese Society Mechanical Engineering, Part B., Vol. 59, pp. 3290-3295
- Stanton, D. W. and Rutland, C. J., 1996, 'Modeling Fuel Film Formation and Wall Interaction in Diesel Engines,' SAE960628
- Wachters, L. H. J and Westerling, N. A. J., 1966, 'The Heat Transfer from a Hot Wall to Impinging Water Drops in a Spherical State,' Chemical Engineering Science, Vol. 21, pp. 1047-1056 https://doi.org/10.1016/0009-2509(66)85100-X
- Watkins, A. P. and Wang, D. M., 1990, 'A New Model for Diesel Spray Impaction on Walls and Comparison with Experiment,' COMODIA 90 Proceedings of International Symposium on Diagnostics and Modeling of Combustion in Internal Combustion Engines, pp. 243-248, Kyoto, Japan
- Xiong, T. Y. and Yuen, M. C, 1991, 'Evaporation of a Liquid Droplet on a Hot Plate,' International Journal of Heat and Mass Transfer, Vol. 34, pp. 1881-1894 https://doi.org/10.1016/0017-9310(91)90162-8
- Yarin, A. L. and Weiss, D. A., 1995, 'Impact of Drops on Solid Surfaces: Self-Similar Capillary Waves, and Splashing as a New Type of Kinematic Discontinuity,' Journal of Fluid Mechanics, Vol. 283, pp. 141-173 https://doi.org/10.1017/S0022112095002266
- Yoshikawa, Y., Nakada, T., Itoh, T., and Takagi, T., 1993, 'Numerical Simulation System for Analyzing Fuel Film Flow in Gasoline Engine,' SAE 930326
- Zahdeh A. K., Henein N., and Bryzik W., 1990, 'Diesel Cold Starting: Actual Cycle Analysis Under Border-Line Conditions,' SAE900441
- Zhengbai, L., Jingwei, Z., and Yueshang, L., 1990, 'Experimental Investigation of Film-Space Atomization Combustion in DI Diesel Engines,' SAE90I578