Design of Two-axis Force Sensor for Robot's Finger

  • Kim, Gob-Soon (RIIT, Dept, of Control and Instrumentation Engineer-ing Geongsang National University)
  • 발행 : 2001.03.01

초록

This paper describes the design of a two-axis force sensor for robots finger. In detects the x-direction force Fx and y-direction force Fy simultaneously. In order to safely grasp an unknown object using the robots fingers, they should detect the force or gripping direction and the force of gravity direction, and perform the force control using the forces detected. Therefore, the robots hand should be made by the robots finger with tow-axis force sensor that can detect the x-direction force and y-direction force si-multaneously. Thus, in this paper, the two-axis force sensor for robots finger is designed using several parallel-plate beams. The equations to calculate the strain of the beams according to the force in order to design the sensing element of the force sensor are derived and these equations are used to design the aize of two-axis force sensor sensing element. The reliability of the derive equa-tions is verified buy performing a finite element analysis of the sensing element. The strain obtained through this process is compared to that obtained through the theory analysis and a characteristics test of the fabricated sensor. It reveals that the rated strains calculated from the derive equations make a good agreement with the results from the Finite Element Method analysis and from the character-istic test.

키워드

참고문헌

  1. Proceedings of 5th International Workshop on Robotics in Alpe Adria-Danbube Region Grasp forces in TWo-finger: Modeling and measuring M. Ceccarelli(et al.)
  2. Proceedings of the IEEE International Symposium on Industrial Electronics v.3 no.3 Tactile force control feedback in parallel jaw gripper D. Castro(et al.)
  3. Proceedings of the IEEE Intenational Symposium on Industrial Electronics v.2 no.2 Intelligent gripper using low cost industrial N. S. Tlale(et al.)
  4. Proceedings of the Fourth Internaional Conference on Motion and Vibration Control v.3 no.3 BRF compeitive hopfield neural networks for objects grasping C. M. Valente(et al.)
  5. International Journal of Systems Science v.29 no.5 Force explicit slip sensing for the amadeus underwater gipper D. J. Obien(et al.)
  6. FUJTSU Science Technology v.26 no.1 Six-Axis force/torque sensor for assembly robots A. Yabuki
  7. North-Holland Robotics v.2 Force sensing for advanced robot control H. V. Brussel(et al.)
  8. North-Holland Robotics v.2 Apply force/torque sensors to robotic applications J. Lee
  9. IMEKO A miniature 6-axis force sensor of multilayer parallel plate structure Y. Hatamura(et al.)
  10. Mechanical Problems in Measuring Force and Mass A new design for 6-component force/torque sensors K. Ono(et. al.)
  11. Meas. Sci. Technol. v.10 Design and fabrication of a three-component force/moment sensor using plate-beams G. S. Kim(et al)
  12. Inter. Jour. Of KSPE v.1 no.1 Design and strain analysis of precision 3-component load cell G. S. Kim(et al)
  13. J. Korean Soc. Precis. Eng. v.15 no.9 Development of 6-component force/moment calibration machine G. S. Kim(et al.)
  14. Multi-component loadcell NISSHO Electric Works