Investigation of the Three-Dimensional Turbulent Flow Fields of the Gas Swirl Burner with a Cone Type Baffle Plate(I)

  • Kim, Jang-kweon (Department of Marine Engineering, Kunsan National University)
  • Published : 2001.07.01

Abstract

This paper presents vector fields, three dimensional mean velocities, turbulent intensities, turbulent kinetic energy and Reynolds shear stresses measured in the X-Y plane of the gas swirl burner with a cone type baffle plate by using an X-type hot-wire probe. This experiment is carried out at the flow rates of 350 and 450ℓ/min which are equivalent to the combustion air flow rate necessary to release 15,000 kcal/hr in a gas furnace. The results show that the maximum axial mean velocity component exists around the narrow slits situated radially on the edge of a burner. Therefore, there is some entrainment of ambient air in the outer region of a burner. The maximum values of turbulent intensities occur around the narrow slits and in front of a burner up to X/R=1.5. Moreover, the turbulent intensity components show a relatively large value in the inner region due to the flow diffusion and mixing processes between the inclined baffle plate and the swirl vane. Consequently, the combustion reaction is expected to occur actively near these regions.

Keywords

References

  1. Aoki K., Nakayama Y. and Wakatsuki M, 1988, 'Study on the Cylindrical Combustor Flow with Swirling Flow (1st Report, Characteristics of Flow Pattern for Swirling Number),' Transactions of JSME (Part B), Vol. 51, No. 468, pp. 2759-2766 (In Japanese)
  2. Aoki K., Shibata M. and Nakayama Y., 1989, 'Study on the Cylindrical Combustor Flow with Swirling Flow (2nd Report, Characteristics of Turbulence for Swirling Number),' Transactions of JSME (Part B), Vol. 52, No. 476, pp. 1617-1625 (In Japanese)
  3. Beer J. M. and Chigier N. A., 1972, Combustion Aerodynamics, Applied Science Publishers, pp. 100-146
  4. Bruun H. H., 1996, Hot-Wire Anemometry, Oxford Science Publications, pp. 132-163
  5. Dantec, 2000, Streamline User's Reference Manual, Chapter 8.3 Algorithms
  6. Hirai, T., Nagai, N., Koseki, H., Kato, K., and Takado, J., 1988, 'Study on Spray Combustion Characteristics of a High Intensity Swirl Combustor (1st Report, Combustion Characteristics of Kerosene Spray),' Transactions of JSME (Part B), Vol. 51, No. 463, pp. 1077-1082 (In Japanese)
  7. Ikeda Y., Kawahara N. and Nakayima T., 1995, 'Flux Measurements of $O_2$, $Co_2$ and NO in Oil Furnace,' Transactions of JSME (Part B), Vol. 61, No. 581, pp. 332-338 (In Japanese)
  8. Kihm, K. D., Chigier, N., and Sun, F., 1990, 'Laser Doppler Velocimetry Investigation of Swirler Flowfields,' J. Propulsion, Vol. 6, No. 4, pp. 364-374
  9. Kim, I. K., 1997, 'The Study on Flame Structure and Characteristics of Gun Type Burner for Different Type of Flame Holder,' Master Thesis, Pusan National University, pp. 43-46 (In Korean)
  10. Kim, I. K., Youn, W. H., Ha, M. Y. and Kim, Y. H., 1998, 'The Study on Flow and Combustion Characteristics of Gun-Type Gas Burner,' Proceedings of the KSME Spring Annual Meeting B, pp. 284-289 (In Korean)
  11. Kim, J. K., Jeong, K. J., Kim, S. W. and Kim, I. K., 2000, 'Investigation of the Three-dimensional Turbulent Flow Fields in Cone Type Gas Burner for Furnace,' Journal of KSPSE, Vol. 4, No. 4, pp. 25-31 (In Korean)
  12. Kim, J. K., 2001, 'An Experimental Study on the Three Dimensional Turbulent Flow Characteristics of Swirl Burner for Gas Furnace,' Transactions of KSME (Part B), Vol. 25, No. 2, pp. 225-234 (In Korean)
  13. Kurihara N., Ikeda Y. and Nakajima T., 1994, 'Spray Behavior and Its Interaction with Turbulent Air Flow on Gun-Type Burner,' Transactions of JSME (Part B), Vol. 60, No. 570, pp. 656-661 (In Japanese)
  14. Kurihara N., Ikeda Y. and Nakajima T., 1995, 'Dispersion Process of the Formed by an Air-Assisted Injector,' Transactions of JSME (Part B), Vol. 61, No. 582, pp. 759-764 (In Japanese)
  15. Lilley, D. G. and Chigier, N. A., 1971, 'Nonisotropic Turbulent Shear Stress Distribution in Swirling Flows from Mean Value Distributions,' International Journal of Heat and Mass Transfer, Vol. 14, pp. 573-585 https://doi.org/10.1016/0017-9310(71)90007-X
  16. Yoon, W. H., 1999, 'The Numerical Study on the Flow and Combustion Characteristics of Gas Swirl Burner,' Master Thesis, Pusan National University, pp. 7-39 (In Korean)