Journal of Mechanical Science and Technology

  • 제15권6호
  • /
  • Pages.727-734
  • /
  • 2001
  • /
  • 1738-494X(pISSN)
  • /
  • 1976-3824(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지

Tribological Evaluation of Dental Composite Resins Containing Prepolymerized Particle Fillers

  • Ren, Jing-Ri (Graduate school, Department of Mechanical Engineering, Kyungpook National University) ;
  • Kim, Kyo-Han (Department of Dental Biomaterials, College of Dentistry, Kyungpook National University) ;
  • Kim, Seock-Sam (School of Mechanical Engineering, Kyungpook National University)
  • 발행 : 2001.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The Tribological evaluation of commercial dental composite resins containing prepolymerized particle fillers was investigated. Composite resins such as Metafil, Silux Plus, Heliomolar, and Palfique Estelite were selected as specimens. In the wear tests, a ball-on-flat wear test method was used. The friction coefficient of Metafil was quite high. The wear resistance of Silux Plus and Palfique Estelite was better than that of Metafil and Heliomolar under the same experimental conditions. The main wear mechanism of the composite resins containing prepolymerized particle fillers was abrasive wear caused by the brittle fracture of the prepolymerized particles and the debonding of the filler and the matrix.

키워드

참고문헌

  1. Bayne, S.C. Heymann H.O. and Swift, E.J. 1994, 'Update on Dental Composite Restorations,' J. Am. Dent. Assoc., 125, pp. 687-701
  2. Bowen, R.L., Nemoto, K. and Kapson, J. E, 1983, 'Adhesive Bonding of Various Materials to Hard Tooth Structure;Forces Developing in Composite Materials During Hardening,' J. Am. Dent. Assoc. 106, pp. 475-477
  3. Degani, R., 1992, 'Nanostructed Materials Promise to Advance Range of Technologies,' Chem. Eng. News 70, pp. 18-24
  4. Gibson, G.B., Richardson, A.S., Patton, R.E. and Waldman, R., 1982, 'A Clinical Evaluation of Occlusal Composite and Amalgam Restoration, One-and Two-Year Results,' J. Am. Dent. Assoc. 104, pp. 335-337
  5. Goldman, M., 1983 'Polymerization Shrinkage of Resin Based Restorative Materials,' Aust. Dent. J. 28, pp. 156-161
  6. Hendriks, F.H.J., Letzel, H. and Vrijhoetf, M. M. A., 1987, 'Composite Versus Amalgam Restorations, a Three-Year Clinical Evaluation,' J. Oral Rehabill3, pp. 401-411
  7. Higo, Y., Damri, D., Nuhomura, S., Kumada, K., Sawa, N., Hanoka, K., Teranaka, T., and Iwamoto, T., 1991, 'The Fracture Toughness Characteristics of Three Dental Composite Resins,' Bio-Med. Mater. Eng. 1, pp. 223-231
  8. Kim, K.H., Park, J.H., Imai, Y. and Kishi, T., 1991, 'Fracture Behavior of Dental Composite Resins,' Bio-Med Mater Eng 1, pp. 45-45
  9. Li, Y. Swartz, M.L., Phillips, R.W., Moor, B. K., and Roberts, T.A., 1985, 'Effect of Filler Content and Size on Properties of Composites,' J. Dent Res 64, pp. 1396-1401
  10. Lutz F., Phillips, R.W. Roulet, J.F. and Setcos, J.C. 1984, 'In Vivo and in Vitro Wear of Posterior Composites,' J. Dent Res 63, pp. 914-920
  11. Mohsen, N.M. and Craig, R G., 1995, 'Effect of Silanation of Fillers on Their Dispersability by Monomer Systems,' J. Oral Rehabil 22, pp. 183-189 https://doi.org/10.1111/j.1365-2842.1995.tb01562.x
  12. Suzuki, H., Taira, M., Wakasa, K. and Yamaki, M., 1991, 'Refractive-Index-Adjustable Fillers for Visible Light Cured Dental Resin Composites;Preparation Of $TiO_2-SiO_2$ Glass Powder by the Sol-Gel Process,' J. Dent. Res., 70, pp. 883-888
  13. Taira, M., Urabe, H., Hirose, T., Wakasa, K. and Yamaki, M., 1988, 'Analysis of Photo-Initiators in Visible-Light-Cured Dental Composite Resins,' J. Dent Res 67, pp. 24-28
  14. Wassell, R.W., McCabe, J.F., and Walls, A.W.G., 1994, 'A Two-body Frictional Wear Test,' J. Dent Res. 73, pp. 1546-1553