References
- Ahn, S.W., 1999a 'Structure of Turbulence of Fully Developed Flow in Concentric Annuli with Rough Outer Wall,' Korean J. of Air-Conditioning and Refrigeration Eng., Vol. 11, No. 1, pp. 1-9(in Korea)
- Ahn, S.W., 1999b, 'Friction Factors for Flow in Concentric Annuli with Rib-Roughened Wall,' Transactions of KSME(B), Vol. 23 No.5, pp. 587-592(in Korea)
- Altemani, C.A. C. and Sparrow, E.M., 1980, 'Turbulent Heat Transfer and Fluid Flow in an Unsymmetrically Heated Triangular Duct,' ASME J. of Heat Transfer, Vol. 102, pp. 590-597
- Bhuiyan, A., 1977, 'An Asymmetric Turbulent Fluid Flow Induced By Rectangular Ribbed Surface Roughness,' Master of Appl. Sci., Mech. Eng., Univ, of Ottawa, Ontario
- Hall, W.B., 1962, 'Heat Transfer in Channels Having Rough and Smooth Surfaces,' J. Mech. Engng. Sci., pp. 287-291 https://doi.org/10.1243/JMES_JOUR_1962_004_037_02
- Han, J.C., 1988, 'Heat Transfer and Friction Characteristics in Rectangular Channels with Rib Turbulators,' ASME J. of Heat Transfer, Vol. 110, pp. 321-328
- Han, J.C., Glicksman, L.R., and Rohsenow, 1978, 'An Investigation of Heat Transfer and Friction for Rib-Roughness Surfaces,' Int. J. Heat Mass Transfer, Vol. 21, pp. 1143-1156 https://doi.org/10.1016/0017-9310(78)90113-8
- Han, J.C., Park, J.S. and Lei, C.K., 1985, 'Heat Transfer Enhancement in Channels with Turbulence Promoters,' ASME J. of Heat Transfer, Vol. 107, pp. 321-328
- Hong, Y.J. and Hsieh, S.S. 1993, 'Heat Transfer and Friction factor Measurements in Ducts with Staggered and In-Line Ribs,' ASME J. of Heat Transfer, Vol. 115, pp. 58-65
- Kang, H,J., Wong, T.T., and Leung, C.W., 1998, 'Enhanced Forced Convection in Triangular Ducts by Roughened Surface,' Proc. of 11th IHTC, Vol. 5, pp. 375-380
- Kays, W.M. and Crawford, M.E., 1993, Convective Heat and Mass Transfer, 3rd Ed., McGraw-Hill Book Co.
- Kays, W.M. and London, A.L., 1984, Compact Heat Exchangers, 3rd Ed. McGraw-Hill Book Co.
- Kline, S.J., and McClintock, F.A., 1953, 'Describing Uncertainties in Single - Sample Experiment,' Mechanical Engineering, Vol. 75, pp. 3-8
- Kwon, H.J., Wu, S.J. and Cho, H.H., 2000, 'Effects of Discrete Rib-Turbulators on Heat/ Mass Transfer Augumentation in a Rectangular Duct,' Transations of KSME(B), Vol. 24, No.5, pp. 744-752(in Korea)
- Lee, Y.P. and Ahn, S.W. and Lee, Y., 1990, 'Turbulent Fluid Flow and Heat Transfer Induced by Square-Ribbed Surface Roughness in Concentric Annuli,' Proc. of 9th Int. Heat Transfer Conf., 4-MC-20, Jerusalem, pp. 466-470
- Shah, R.K. and London A.L., 1978, Laminar Flow Forced Convection in Ducts, Academic Press Book Co.
- Siegel, R. and Howell, J.R., 1981, Thermal Radiation Heat Transfer, 2nd ed., McGraw-Hill Book Co.
- Webb, R.L., 1995, Fundamentals of Enhanced Heat Transfer, Wiley Inter Science Book Co.
- Webb, R.L. and Eckert, E.R. G., 1972, 'Application of Rough Surfaces to Heat Exchanger Design,' Int. J. of Heat Mass Transfer, Vol. 15, pp. 1647-1658 https://doi.org/10.1016/0017-9310(72)90095-6
- Webb, R.L., Eckert, E.R. G., and Goldstein. R. J., 1971, 'Heat Transfer and Friction in Tubes with Repeated-Ribs Roughness,' Int. J. Heat Mass Transfer, Vol. 15, pp. 601-617 https://doi.org/10.1016/0017-9310(71)90009-3
- Wilkie, D., 1966, 'Forced Convection Heat Transfer from Surfaces Roughened by Transverse Ribs,' Proc. of 3rd IHTC, Paper I