참고문헌
- Ahmadi-Befrui, B., Uchil, N., Gosman, A. D. and Issa, R. I., 1996, 'Modelling and Simulation of Thin Liquid Films Formed by Spray-Wall Interaction,' SAE 960627
- Arcoumanis, C. and Chang, J.-C., 1993, 'Heat Transfer Between a Heated Plate and an Impinging Transient Diesel Spray,' Experiments in Fluids, Vol. 16, pp. 105-119 https://doi.org/10.1007/BF00944912
- Arcoumanis, C. and Chang, J.-C., 1994, 'Flow and Heat Transfer Characteristics of Impinging Transient Diesel Spray,' SAE 940678
- Bai, C. and Gosman, A. D., 1995, 'Development of Methodology for Spray Impingement Simulation,' SAE 950283
- Bai, C. and Gosman, A. D., 1996, 'Mathematical Modelling of Wall Films Formed by Impinging Spray,' SAE 960626
- Borman, G. L. and Johnson, J. H., 1962, 'Unsteady Vaporisation Histories and Trajectories of Fuel Drops Injected into Swirling Air,' SAE 598C
- Eckhause, J. E. and Reitz, R. D., 1955, 'Modelling Heat Transfer to Impinging Fuel Sprays in Direct-Injection Engines,' Atomization and Sprays, Vol. 5, pp. 213-242
- Gavaises, M., 1997, 'Modelling of Diesel Duel Injection Processes,' PhD thesis, Imperial College of Science, Technology and Medicine, University of London
- Lee, S. H., 1998, 'Development of a New Model and Heat Transfer Analysis of Impinging Diesel Sprays on a Wall,' PhD thesis, Chung-Ang University
- KSME International Journal v.21 no.2 Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process Mundo C.;Sommerfeld M.;Tropea C.
- Lee, S. H., Ryou, H. S., 2000, 'Modeling of Diesel Spray Impingement on a Flat Wall,' KSME International Journal, Vol. 21, No. 2, pp. 151-173
- Schunemann, E., Fedrow, S. and Leipertz, A.,.1998, 'Droplet Size and Velocity Measurements for the Characterization of a DI Diesel Spray Impinging on a Flat Wall,' SAE 982545
- Mundo, C., Sommerfeld, M. and Tropea, C., 1995a, 'Droplet-Wall Collisions: Experimental Studies of the Deformation and Breakup Process,' Int. J. Multiphase Flow, Vol. 21, No. 2, pp. 151-173 https://doi.org/10.1016/0301-9322(94)00069-V
- Mundo C., Sommerfeld M. and Tropea C., 1998, 'On the Modelling of Liquid Sprays Impinging on Surfaces,' Atomization and Sprays,Vol. 8, pp. 625-652
- Naber, J. D. and Reitz, R. D., 1988, 'Modelling Engine Spray/Wall Impingement,' SAE 880107
- Nagaoka, M., Kawazoe, H. and Nomura, N., 1994, 'Modelling Engine Spray/Wall Impingement on a Hot Wall for Gasoline Engines,' SAE 940525
- O'Rourke, P. J., 1981, 'Collective Drop Effects on Vaporizing Liquid Sprays', PhD thesis, Princeton University, Princeton, NJ
- Park K., 1994, 'Development of a Non-Orthogonal-Grid Computer Code for the Optimization of Direct-Injection Diesel Engine Combustion Chamber Shapes,' PhD thesis, University of Manchester Institute of Science and Technology
- Park, K. and Watkins, A. P., 1996, 'Comparison of Wall Spray Impaction Models with Experimental Data on Drop Velocities and Sizes,' Int. Heat and Fluid Flow, Vol. 17, No. 4, pp. 424-438 https://doi.org/10.1016/0142-727X(96)00049-5
- Reitz, R. D., 1987, 'Modelling Atomization Processes in high-Pressure Vaporizing Sprays,' Atomization and Spray Tech., Vol. 3, pp. 309-337
- Reitz, R. D. and Diwakar, D., 1987, 'Structure of High Pressure Fuel Sprays,' SAE 870598
- Reynolds, W. C., 1980, Modelling of Fluid Motions in Engines-an Introductory Overview, in Combustion Modelling in Reciprocating Engines, ed. J. N. Mattavi and C. A. Amann, Plenum Press, NY
- Rodrigues, F. and Mesler, R., 1985, 'Some Drops Don't Splash,' J. of Colloid and Interface Science, Vol. 106, No. 2,pp. 347-352 https://doi.org/10.1016/S0021-9797(85)80008-4
- Yarin, A. L. and Weiss, D. A., 1995, 'Impact of Drops on Solid Surfaces: Self-similar Capillary Waves and Splashing as a New Type of kinematic Discontinuity,' J. Fluid Mech., Vol. 283, pp. 141-173 https://doi.org/10.1017/S0022112095002266
- Mundo, C., Sommerfeld, M. and Tropea, C., 1995b, 'Numerical and Experimental Investigation of spray Characteristics in the Vicinity of a Right Wall,' ICLASS 95, Two Phase Flow Modelling And Experiment, Rome
- Senda, J., Kanda, T., Al-Roub, M., Farrell, P. V., Fukami, T. and Fujimoto, H., 1997, Modelling Spray Impingement Considering Fuel Film Formation on the Wall,' SAE 970047
- Stanton, D. W. and Rutland, C. J., 1996, 'Modelling Fuel Film Formation and Wall Interaction in Diesel Engines,' SAE 960628
- Stanton, D. W. and Rutland, C. J., 1998, 'Multi-dimensional Modelling of Thin Liquid Films and Spray Wall Interactions Resulting from Impinging Sprays,' Int. J. Heat and Mass Transfer., vol. 41, pp. 3037-3054 https://doi.org/10.1016/S0017-9310(98)00054-4
- Watchters, L. H. J. and Westerling, N. A. J., 1966, 'The Heart Transfer from a Hot Wall to Impinging Water Drops in a Spheroidal State,' Chem. Eng. Sic., Vol. 21, pp. 1047-1056 https://doi.org/10.1016/0009-2509(66)85100-X
- Watkins, A. P., 1989, 'Three-dimensional Modelling of Gas Flow and Sprays in Diesel Engines,' In Computer Simulation of Fluid Flow Heat and Mass Transfer and Combustion in Reciprocating Engines, N. C. Markatos(ed), Hemisphere, Bristol, PA, pp. 193-237
- Watkins, A. P. and Wang, D. M., 1990, 'A New Model for Diesel Spray Impaction on Walls and Comparison with Experiment,' Int. Symp. on Diagnostics and Modelling of Combustion in IC Engines, Kyoto, pp. 243-248
- Xiong, T. Y. and Yuen, M. C., 1991, 'Evaporation of a Liquid Droplet on a Hot Plate,' Int. J. Heat and Mass Transfer, Vol. 34, No. 7, pp. 1881-1894 https://doi.org/10.1016/0017-9310(91)90162-8
- Senda, J., Kobayashi, M., Iwashita, S. and Fujimoto, H., 1994, 'Modelling of Diesel Spray Impingement on a Flat Wall,' SAE 941894