Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Establishment of Fracture Criteria for Mixed Mode in Bonded Dissimilar Materials with an Crack Emanating from an Edge Semicircular Hole

이종 접합체의 원공에서 파생하는 균열에 대한 혼합모드 파괴기준의 설정

  • Published : 2001.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

Application of bonded dissimilar materials in many industries are increasing. When these materials are to be used in structures, it needs to evaluate the failure strength applying fracture mechanics. Al/Epoxy bonded dissimilar materials with an interface crack and an interface crack emanating from an edge semicircular hole were prepared, experiment of fracture toughness were carried out. Stress intensity factors of interface cracks in bonded dissimilar materials were computed with boundary element method(BEM) and the fracture criteria of mixed mode crack were analyzed. From the results, the fracture criteria and the method of strength evaluation by the fracture toughness in Al/Epoxy bonded dissimilar materials were proposed.

Keywords

References

  1. 정남용, 1992, '접착이음의 강도평가에 관한 연구 (제1보),' 대한기계학회논문집, 제16권, 제4호, pp. 667-674
  2. 장남용, 1995, '이종재료의 경사 접착이음에 대한 파괴강도의 예측,' 한국공작기계학회지, 제4권, 제4호, pp. 50-60
  3. 정남용, 장진모, 1997, 'Al/Epoxy 이종재료의 접착이음에 대한 혼합모드의 파괴기준,' 대한기계학회논문집(A), 제21권, 제8호, pp. 1322-1331
  4. 鄭南龍, 結城良治, 石川晴雄, 中野 禪, 1990, '接着斷手 の 混合モ-ド 破壞基準.' 材料, 第 39卷, 443號, pp. 1095-1100
  5. Yuuki, R. and Xu, J. Q. 1992, 'Stress Based criteria for an Interface Crack Kinking Out of the Interface in Dissimilar Materials,' Eng. Frac. Mech., Vol. 41, No. 5, pp. 635-644 https://doi.org/10.1016/0013-7944(92)90150-D
  6. 정남용, 송춘호, 1996, '이종접합재료의 계면균열에 대한 진정경로의 예측,' 한국자동차공학회 논문집, 4권 3호, pp. 112-121
  7. Isida M., Noguchi H., 1984, 'Tension of a Plate Containing an Embedded Elliptical Crack,' Eng. Frac. Mech., Vol. 20, No. 3, pp. 387-408 https://doi.org/10.1016/0013-7944(84)90046-8
  8. Lin X.B., Smith R.A., 1999, 'Sterss intensity factors for comer cracks emanating from fastener holes under tension,' Eng. Frac. Mech., Vol. 62, pp. 535-553 https://doi.org/10.1016/S0013-7944(99)00007-7
  9. Edorgan, F., 1695, 'Stress Distribution in Bonded Dissimilar Materials with Cracks,' J. Applied Mechanics, Vol. 32, pp. 400-402
  10. Rice, J. R., 1988, 'Elastic Fracture Mechanics Concepts for Interfacial Cracks', Trans. ASME, J. of Applied Mechanics, Vol. 55, pp. 98-105
  11. Fleck, N. A., Hutchinson, J. W. and Sou, Z., 1991, 'Crack Path Selection in a Brittle Adhesive Layer,' Int. J. Solid Stru., Vol. 27, pp. 1683-1703 https://doi.org/10.1016/0020-7683(91)90069-R
  12. Sun C. T., Jih C. J., 1987, 'On the Strain Energy Release Rate for Interfacial Cracks in Bimaterial Media,' Eng. Frac. Mech., Vol. 28, pp. 12-20 https://doi.org/10.1016/0013-7944(87)90115-9