참고문헌
- Barata Da Rocha, A., Barlat, F. and Jalinier, J. M., 1984, 'Prediction of Forming Limit Diagrams of Anisotropic Sheets in Linear and Non-Linear of Anisotropic Sheets in Linear and Non-Linear Loading,' Mater.Sci. Engng., Vol. 68, pp. 151-164
- Barlat, F. and Lian, J., 1989, 'Plastic Behavior and Stretchability of Sheet Metals, Part I : A Yield Function for Orthotropic Sheets Under Plane Stress Conditions,' Int. J. Plasticity, Vol. 5, pp. 51-66 https://doi.org/10.1016/0749-6419(89)90019-3
- Charpentier, P. L., 1975, 'Influence of Punch Stretching Curvature on the Stretching Limits of Sheet Steel,' Met. Trans., Vol. 6A, pp. 1665-1669 https://doi.org/10.1007/BF02641986
- Ghosh, A. K. and Hecker, S. S., 1974, 'Stretching Limit in Sheet Metals: In-Plane Versus Out-of-plane Deformations,' Met. Trans., Vol. 5A, pp. 2161-2164 https://doi.org/10.1007/BF02643929
- Goodwin, G. M., 1968, 'Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop,' SAE Paper, 680093
- Hecker, S. S., 1975, 'A Simple Technique for Determining Forming Limit Curves,' Sheet Metal Ind, Vol. 52, pp. 671-676
- Keeler, S. P., 1965, 'Determination of Forming Limits in Automotive Stampings,' SAE paper, No. 650535
- Kim Y. S. and Park, K. C., 1993, 'A Consideration on the Simulation Tests for Evaluating Stamping Formability,' J. Korean Soc. Mech. Engng. Vol. 33, pp. 47-65
- Marciniak, Z. and Kucznski, K., 1967, 'Limit Strains in the Processes of Stretch-Forming Sheet Metals,' Int. J. Mech. Sci., Vol. 9, pp. 609-620 https://doi.org/10.1016/0020-7403(67)90066-5
- Nam, J. B., Park, K. C. and Jeong, K. J., 1997, 'Determination of Forming Limit Curves of Steel Sheets with Considering the Effect of Strain-Path Changes,' J. Korean Soc. Tech. Plasticity, Vol. 6, pp. 36-45
- Shi, M. F. and Gerdeen, J. C., 1991, 'Effect of Strain Gradient and Curvature on Forming Limit Diagrms for Anisotropic Sheets,' J. Mater. Shaping Technol., Vol. 9, pp. 253-268
- Son, H. S., Kim, Y. S., Lim, S. E., 1999, 'Prediction of Forming Limit Diagrams for Anisotropic Sheet Metals,' Proc. 12th Comp. Mech. conf. JSME, pp. 281-282
- Storen, S. and Rice, J. R., 1975, 'Localized Necking in Thin Sheets,' J. Mech. Phys. Solids, Vol. 23, pp. 421-441 https://doi.org/10.1016/0022-5096(75)90004-6
- Zhao, L., Sowerby, R. and Sklad, M. P., 1996, 'A Theoretical and Experimental Investigation of Limit Strains in Sheet Metal Forming,' Int. J. Mech. Sci., Vol. 38, pp. 1307-1317 https://doi.org/10.1016/0020-7403(96)00014-8