Transactions of the Korean Society of Mechanical Engineers B (대한기계학회논문집B)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on Areas of Application of a Extended Collision Model in a Wall Impaction Spray Calculation

벽면충돌분무 계산에서 확장충돌모델의 적용범위에 관한 고찰

  • Published : 2001.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper addresses to the area where the extended collision model is applied. In order to find the optimum shape of wall sprays, the extended model is applied to the nearest cells of just over the impaction wall, spray core or over all. The droplet distribution, wall spray radii, heights and gas flows are shown in all the cases. Those results show that the best spray shape represents in the case applying the extended model just on the impinging wall.

Keywords

References

  1. Naver, J.D. and Reitz, R.D., 1998, 'Modelling Engine Spray/Wall Impingement,' SAE Paper No. 880107
  2. Naver, J.D., Enright, B. and Farrel, D. 1988, 'Fuel Impingement in a Direct Injection Diesel Engine,' SAE Paper 881316
  3. Shih, L.K. and Assains, D.N, 1991, 'Implementation of a Fuel Spray Wall Interaction Model in KIVA-II,' SAE paper 911787
  4. Reitz, R.D. and Rutland, C.J., 1991, '3-D Modelling of Diesel Engine Intake Flow, Combustion and Emissions,' SAE paper 911489
  5. Wakisaka, T., Yoshida, S.K., Isshiki, Y., and Shimamoto, Y., 1993, 'A Study on Spray Models for Numerically Analysing Fuel Spray Behaviour,' Proc. 11th Symp. on Internal Combustion Engines, JSME/JSAE, pp. 241-246. (in Japanese)
  6. Watkins, A.P. and Wang, D.M., 1990, 'A New Model for Disel Spray Impaction on Walls and Comparison with Experiment,' In Int. Symp. on Diagnostics and Modelling of combustion in I. C. Engines, Kyoto
  7. Park, K. and Watkins, A.P., 1996, 'The Effect of Non-orthogonal Grids on Spray and Air Flow Predictions,' KSME Journal, Vol. 10, No. 4, pp. 458-470
  8. O'Rourke, P.J. and Brocco, F.V., 1980, 'Modelling of Drop Interactions in Thick Sprays and a Comparison with Experiment,' In Stratified Charge Automotive Engine Conf. I.Mech.E.
  9. Reitz, R.D. and Kiwakar, R., 1986, 'Effect of Drop Break-up on Fuel Sprays,' SAE 860469
  10. Araki, K. and Moriyama, A., 1982, 'Deformation Behaviour of a Liquid Droplet Impinging on a Hot Metal Durface,' In Int. Cont. on Liquid Atomization and Spraying Systems ICLASS-82
  11. Jayaratne, O.W. and Mason, B.T., 1964, 'The Coalescence and Bouncing of Water Drop at Air/Water Interface,' Proc. R. Soc. Lond-A 280, p. 545
  12. Wachters, L.H.J. and Westerling, N.A.J., 1966, 'The Heat Transfer from a Hot Wall to Impinging Water Drops in the Spheroidal State,' Chemical Engineering Science, 21, p. 1047 https://doi.org/10.1016/0009-2509(66)85100-X
  13. Mirza, R., 1991, 'Studies of Disel Spray Inter Acting with Cross-Flow and Solid Boundaries,' PhD Thesis, University of Manchester, Faculty of Technology
  14. Wang, D.M., 1992, 'Modeling Spray Wall Impaction and Combustion Process of Disel Engines,' PhD thesis, University of Manchester, Faculty of Technology
  15. Katsura, N., Satio, M. Senda, J. and Fujimoto, H., 1989, 'Characteristics of a Spray Impinging on a Flat Wall,' SAE Paper 890264
  16. Senda, J., Fukami, Y., Tanabe, Y. and Fujimoto, H., 1992, 'Visualization of Evaporative Diesel Spray Impinging upon Wall surface by Exciplex Fluorescence Method,' SAE Paper 920578
  17. Suzuki, M., Nishida, K. and Hiroyasu, H., 1993, 'Simultaneous Concentration Measurement of Vapor and Liquid in an Evaporating Diesel Spray,' SAE Paper 930863