Abstract
In this paper. the development of a pusher-barge hull form which enables the continuous transportation along the coast and canal is performed. For the design stage of the hull forms. these are developed for Kyungin canal which is will be drawn up as the next contribution project of the Korean government are adopted. The model tests for the designed ship are carried out in the Inha University Towing Tank and the numerical simulations are done with a finite difference method based on MAC scheme. At first, the experiments are performed with designed model ships from low speed to high speed including service speed(6knots) among the corresponding designed speed. Resistance characteristics of designed ships are compared with experimental results of other several pusher-barge hull shapes. Next, the numerical simulations are performed for three cases, that is pusher only, barge only and pusher-barge condition in the designed speed. Each calculations are carried out in deep and restricted water condition. The flow characteristics around hulls in the latter condition are compared with those in the former condition.
본 논문에서는 연안과 운하에서 연계수송이 가능한 수송시스템의 개발을 위하여 설계된 바지(barge)와 푸셔(pusher)의 저항성능을 모형시험과 수치계산에 의하여 해석하고자 하였다. 무한수심 조건에서의 모형시험으로는 인하대학교 선형시험수조에서 저항과 침하, 선측파형 등을 계측하였으며, 유동장 해석을 위한 수치계산의 경우에는 MAC법을 기초로 한 유한차분법(Finite Difference Method)에 의하여 계산을 수행하였다. 먼저, 모형시험의 경우에는 계획속력을 6knots로 하는 설계선형에 대하여, 저속에서부터 계획속도이상의 구간까지 모형시험을 실시하여 각 속도에 따른 저항특성들을 비교하였다. 일련의 모형시험 결과들은 기존의 유사한 선형의 모형시험결과들과 비교하였다. 수치계산의 경우에는, 설계선형에 관하여 계획속도에서 푸셔와 바지선형 각각의 단독운항상태와 두 선체가 동시에 연결되어 운항하는 상태에 대한 계산을 수행하였다. 또한, 모형시험이 어려운 제한수로를 운항하는 상태에 관하여도 수치계산을 수행하였고, 각각의 계산결과들로부터 운항상태에 따른 선체주위의 유동장의 특성을 비교하였다.