Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Design and Analysis of Gear Train with Composition of Optimum Gear Ratio

최적 치차비 구현을 통한 치차열의 각도 위치 오차 설계 및 해석

  • Published : 2001.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper addresses an analytical approach to the mechanical error analysis of gear train and tolerance design and manufacture of gear train in restricted space considering motor driving torque, driving system inertia, motor acceleration, motor rotor inertia and friction torque. The gear train is designed to have optimum gear ratio in restricted space and each gear is manufactured to have the lowest weight and each gear tooth is heat-treated to have robustness. Based on the small difference between the mechanical error analysis and measurement, gear train design with optimum gear ratio and restricted space and robustness is proposed.

Keywords

References

  1. 'Gear Design Manufacturing and Inspection Manual,' Society of Automotive Engineers Inc, 1990
  2. 최진호, '공차로 인한 평면 기구의 기계적 오차 해석,' 대한기계학회 논문집, pp.663-672, 1997
  3. M. S. Tavakoli, D. R. Houser, 'Optimum Profile Modifications for the Minimization of Static Transmission Errors of Spur Gear', Trans. of ASME, Vol.108, Mar. pp.86-95, 1986
  4. Y. Atiga, S. Nagata, 'Load Capacity of a New W-N Gear with Basic Rack of Combined circular and Involute Profile', Trans of ASME, J.of Mechanism,Transmissions,and Automation in Design, Vol.107, Dec, pp.565-572, 1985
  5. Z. Ou, A. Seireg, 'Analysis and Synthesis of Circular Arc Gears by Interactive Graphics', Trans of ASME,J.of Mechanism,Transmissions,and Automation in Design, Vol.108, Mar, pp.65-71, 1988
  6. George W. Michalec, 'Precision Gearing : Theory and Practice,' 1966
  7. C. J. Richards, 'Mechanical Engineering in Radar and Communications,' 1967
  8. Humphrey, W.M., 'Introduction to servomechanism system design,' 1973
  9. 김석, 박희재, 안우정, 김구영, '삼차원 측정기를 이용한 기어 형상 정밀도 측정 및 평가 기술 개발,' 대한기계학회 추계학술대회, 1997
  10. 유명섭, '타원형 엽형 기어의 설계 및 동특성에 관한 연구,' 한국정밀공학회지, pp.7-14, 1998
  11. 최상훈, '인벌류우트-트로코이드 치형을 갖는 타원계 엽형기어의 최소 잇수에 관한 연구,' 한국정밀공학회지, pp.85-92, 1998