한국정밀공학회지 (Journal of the Korean Society for Precision Engineering)

  • 제18권5호
  • /
  • Pages.98-104
  • /
  • 2001
  • /
  • 1225-9071(pISSN)
  • /
  • 2287-8769(eISSN)
한국정밀공학회 (Korean Society for Precision Engineering)
권호 표지

세브론노치 세라믹시편을 이용한 동적파괴인성측정

Measurement of Dynamic Fracture Toughness Using Chevron Notched Ceramic Specimen

  • 발행 : 2001.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A dynamic fracture toughness test method with a chevron notched ceramic specimens is proposed. The notch angles of the chevron specimens were 90, 100$^{\circ}$and 110$^{\circ}$. Finite element analysis(FEA) were done to determine the geometrical properties of chevron-notch specimens according to notch angles. The static fracture toughness of the chevron notched alumina specimen was 3.8MP$\alpha$√m similar to that of the general fracture specimen with a precrack. Dynamic fracture toughness was 4.5 MP$\alpha$√m slightly higher than the static one. These research showed the possibility of the split Hopkinson pressure bar test method using the newly proposed chevron notched specimens to get the dynamic fracture toughness of extremely brittle materials such as ceramics.

키워드

참고문헌

  1. R.W. Davidge and G. Tappin, ',' Proceedings of the British Ceramic Society, Vol. 15, pp. 47-60, 1970
  2. Nobuki Miyahara, Yoshiharru Mutoh, Kohich Tanada and Manabu Takahashi, 'Fracture Toughness Evaluation of Five Structural Ceramic Materilas by Various Testing Methods,' 일본기계학회논문집(A편), Vol. 57, No. 538, pp. 1326-1333, 1991
  3. ASM Handbook committee, ASM Handbook Volume 8 Mechanical Testing, ASM international, pp.382-386, 1992
  4. T. L. Anderson, Fracture Mechanics 2nd ed., pp. 50-55, pp. 451-454, 1995
  5. Weinong Chen, G. Ravinchandran, 'Dynamic compressive faliure of a glass ceramic under lateral confinement,' J. Mech. Phys. Solids, Vol. 45, No. 8, pp. 1303-1328A, 1997 https://doi.org/10.1016/S0022-5096(97)00006-9
  6. Richard J. Anton, Ghatu Subhash, 'Dynamic Vickers indentation of brittle materials,' Wear, Vol. 239, pp. 23-35, 2000 https://doi.org/10.1016/S0043-1648(99)00364-6
  7. Beech, J. F., Ingraffea, A. R., 'Three-Dimensional Finite Element Calibraton of The Short Rod Specimen,' International Journal of Fracture, Vol. 18, pp. 217-229, 1982 https://doi.org/10.1007/BF00032275
  8. Raju, I. S., Newman, J. C. Jr., 'Three-Dimensional Finite-Element Analysis of The Chevron Notched Fracture Specimen,' Technical Memorandum 85798, NASA Langley Research Center, April, 1984
  9. Anthony R. Ingraffea, 'Stress-Intensity Factor Computation in Three Dimensions with Quarter-Point Elements,' Internatonal Journal for Numerical Methods In Engineering, Vol. 15, pp. 1427-1445, 1980 https://doi.org/10.1002/nme.1620151002
  10. M. H. Aliabadi and D. P. Rooke, Numerical Fracture Mechanics, Computational Mechanics Pub., 1991