Compensation of Geometric Error by the Correction of Control Surface

제어곡면 수정에 의한 기하오차 보정

  • Ko, Tae-Jo (Dept.of Mechanical Engineering, Yeungnam University) ;
  • Park, Sang-Shin (Dept.of Mechanical Engineering, Yeungnam University) ;
  • Kim, Hee-Sool (Dept.of Mechanical Engineering, Yeungnam University)
  • Published : 2001.04.01

Abstract

Accuracy of a machined part is determined by the relative motion between the cutting tool and the workpiece. One of the important factors which affects the relative motion is the geometric errors of a machine tool. In this study, firstly, geometric errors are measured by laser interferometer, and the positioning error of each control point selected uniformly on the control surface CAD model can be estimated from th oirm shaping model and geometric error data base. Where a form shaping function is derived from the link of homogeneous transformation matrix. Secondly, control points are shifted to the estimated amount of positioning errors. A new control surface is modeled with NURBS(Non Uniform Rational B-Spline) surface approximation to the shifted control points. By generating tool paths to the redesigned control surface, we reduce the machining error quite.

Keywords

References

  1. P. M. Ferreira, C. R. Liu, 'An Analytical Quadratic Model for the Geometric Error of a Machining Center,' Journal of Manufacturing System, Vol. 5, No. 1, pp. 51-63, 1986
  2. V. S. B. Kiridena, P. M. Ferreira, 'Kinematic Modeling of Quasi-static Errors of Three-axis Machining Centers,' Int. J. Mach. Tools Manufact., Vol. 34, No. 1, pp. 85-100, 1994 https://doi.org/10.1016/0890-6955(94)90042-6
  3. J. Mou, C. R. Liu, 'A Methodology for Machine Tools Error Correction using Reference Parts,' Int. J. Computer Integrated Manufacturing, Vol. 8, No. 1, pp. 64-77, 1995 https://doi.org/10.1080/09511929508944630
  4. E. M. Lim, C. H. Menq, 'Error Compensation for Sculptured Surface Productions by the Application of Control-Surface Strategy Using Predicted machining Errors,' ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp. 402-409, 1997
  5. T. I. Seo, M. W. Cho, 'Tool Trajectory Generation Based on Tool Deflection Effects in Flat-End Milling Process(I),' KSME International Journal, Vol. 13, NO. 10, pp. 738-751, 1999
  6. M. Y. Yang, J. G. Choi, 'A Tool Deflection Compensation System for End Milling Accuracy Improvement,' ASME Journal of Manufacturing Science and Engineering, Vol. 120, pp. 222-229, 1998
  7. Y. Wang, G. Zhang, K. S. Moon, J. W. Sutherland, 'Compensation for the Thermal Error of a Multi-axis Machining Center,' J. of Materials Processing Technology, Vol. 75, pp. 45-53, 1998 https://doi.org/10.1016/S0924-0136(97)00291-4
  8. S. Fraser, M. H. Attia, M. O. M. Osman, 'Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures;Real-Time Estimation of Heat Sources,' J. of Manufacturing Science and Engineering, Vol. 121, pp. 501-508, 1999
  9. J. C. Liang, H. F. Li, J. X. Yuan, J. Ni, 'A Comprehensive Error Compensation System for Correcting Geometric, Thermal, and Cutting Force-Induced Errors,' Int. J. Adv. Manuf. Technol., Vol. 13, pp. 708-712, 1997 https://doi.org/10.1007/BF01179070
  10. V. S. B. Kiridena, P. M. Ferreira, 'Computational Approaches to Compensating Quasi-static Errors of Three-Axis Machining Center,' Int. J. Mach. Tools Manufact., Vol. 34, No. 1, pp. 127-145, 1994 https://doi.org/10.1016/0890-6955(94)90044-2
  11. 정재일, 김종원, 남원우, 이상조, 'CNC 공작기계용 온라인 실시간 위치오차 보정 시스템의 개발,' 한국정밀공학회지, 제 6 권, 제 10호, pp. 45-51, 1999
  12. D. N. Reshetov, V. T. Portman, Accuracy of Machine Tools, New York, ASME Press, 1988
  13. R. Harumoto, I. Inasaki, 'Error Analysis of Machine Tools Using Form Shaping Function,' JSPE, Vol. 59, No. 6, pp. 915-920, 1993
  14. J. H. Cho, M. W. Cho, K. Kim, 'Volumetric Error Analysis of a Multi-axis Machine Tool Machining a Sculptured Surface Workpiece,' Int. J. Prod. Res, Vol. 32, No. 2, pp. 345-363, 1994 https://doi.org/10.1080/00207549408956937
  15. 이현직, 고태조, 김희술, '점 데이터의 Rational B-spline 근사를 통한 역공학,' 한국정밀학회지, Vol. 16, No. 5, pp. 160-168, 1999