A Study on the Inlet NOx Estimation of SCR System in a Refuse Incineration Plant by Using General Structured Observer

일반 구조형 관측기를 이용한 소각장 SCR 시스템의 Inlet NOx 추정에 관한 연구

  • 이충환 (양산대학 메카트로닉스과) ;
  • 김인규 (부경대학교 대학원) ;
  • 김환성 (한국해양대학교 이공대학 물류시스템공학과) ;
  • 김상봉 (부경대학교 공과대학 기계공학부)
  • Published : 2001.01.01

Abstract

The function of SCR system in refuse incineration plant is to reduce the harmful combustion gases especially NOx which make serious environmental pollution. The SCR system normally have a NOx measurement system such as inlet NOx analyzer and outlet T.M.S.(Tele Monitoring System) to control the outlet NOx in stack. The NOx measurement system is very important, however there are frequently happened sensing problems and it need maintenance periodically. In this paper, we propose an estimation method of inlet NOx of SCR system by using general structured observer. The inlet NOx is considered as an input disturbance and it is modelled by applying FFT method in frequency domains. Through the design of general structured observer, the outlet NOx can be estimated by using observation error between real outlet NOx and estimated outlet NOx. The effectiveness of the proposed method is shown by comparing to a measured inlet NOx data.

Keywords

References

  1. 환경관리공단, '도시 쓰레기 소각처리시설 운영 관리 지침서,' 1994
  2. 신생플랜트, '부산 해운대 소각로 시운전 조작설명서,' 삼성건설, 1996
  3. Nogami, Y. et al., 'Fuzzy Combustion for Reducing both CO and NOx from Flue Gas of Refuse Incineration Furnace,' Symposium on Environmental Engineering, JSME, pp. 104-107, 1995
  4. Krause, B., etc., 'A Neuro-Fuzzy Adaptive Control Strategy for Refuse Incineration Plants,' Fuzzy Sets and System, Vol. 63, pp. 329-338, 1994 https://doi.org/10.1016/0165-0114(94)90219-4
  5. 김인규, 여태경, 김환성, 김상봉, '소각로의 NOx 제어용 SCR 시스템의 암모니아 공급량 제어,' 대한기계학회 논문집 A권 제22권 2호, pp. 451-457, 1998
  6. 서진호, 김인규, 김환성, 김상봉, '진상. 지상 보상기를 지닌 반복제어계를 이용한 소각장 SCR 시스템 제어에 관한 연구,' 한국동력기계공학회 추계학술대회 논문집, pp. 179-182, 1997
  7. 足立修一, 'ユ一ザのたぬのシステム同定理論,' 計測自動制御學會, 1993
  8. 이충환, 김환성, 김상봉, '일반 구조형 관측기에 관한 연구,' 한국정밀공학회, 제17권 9호, pp. 95-101, 2000