A STUDY ON CHANGE OF COMPRESSIVE STRENGTH AND FLEXURAL STRENGTH OF DENTAL COMPOSITE RESIN AFTER WATER STORAGE

치과용 콤포짓트 레진의 수분 흡수에 따른 압축강도와 굴곡강도의 변화에 관한 연구

  • Jeong, Nae-Jeong (Department of Pediatric Dentistry and Dental Research Institute College of Dentistry, Seoul National University) ;
  • Kim, Jung-Wook (Department of Pediatric Dentistry and Dental Research Institute College of Dentistry, Seoul National University) ;
  • Lee, Sang-Hoon (Department of Pediatric Dentistry and Dental Research Institute College of Dentistry, Seoul National University)
  • 정내정 (서울대학교 치과대학 소아치과학교실 및 치학연구소) ;
  • 김정욱 (서울대학교 치과대학 소아치과학교실 및 치학연구소) ;
  • 이상훈 (서울대학교 치과대학 소아치과학교실 및 치학연구소)
  • Published : 2001.02.28

Abstract

The difference of composition of composite resin may affect the mechanical properties of composite resin and the environment is important for the properties of materials. The composite resin restoration is always exposed to fluid in oral cavity and the composite resin matrix is able to absorb water, which is accompanied by some swelling of the composite The uptake of water by composites has been correlated with decreases in surface hardness and wear resistance. The purpose of this study was to investigate the effects of water storage in $37^{\circ}C$ distilled water after 7days, 30days, 60days, 120days on compressive strength and flexural strength of dental composite resin, Z-100(group 1) Spectrum(group 2), Clearfil AP-X(group 3), Pyramid(group 4), Heliomolar(group 5). The compressive and flexural strength were measured by instron machine. The following results were obtained: 1. There were significant reduction of compressive strength as water storage time increased, 7days, 30days, 60 days, 120days(p<0.05). 2. There were significant reduction of flexural strength as water storage time increased, 7days, 30days, 60days, 120days(p<0.05). 3. Group 1, 2, 3 -hybrid type showed higher compressive and flexural strength than group 5-microfine type which had lower filler contents.

콤포짓트 레진의 다양한 성분은 기계적 성질에 많은 영향을 미치고, 수복물 주위의 환경 또한 재료의 성질에 많은 영향을 줄 수 있다. 구강 내에서 수복된 콤포짓트 레진은 항상 수분에 노출되어 있고, 콤포짓트 레진의 매트릭스는 수분을 흡수할 수 있으므로, 그 결과 콤포짓트 레진은 팽창하게 된다. 또한 콤포짓트 레진의 수분 흡수가 표면강도와 마모저항의 저하와 관계된 다고 알려져 있는바 저자는 치과용 콤포짓트 레진의 수분 흡수에 따른 압축강도와 굴곡강도의 변화에 관하여 알아보고자 하였다. 재료는 1군을 Z-100(3M, U.S.A.), 2군을 Spectrum(Dentsply, U.S.A.), 3군을 Clearfil AP-X(Kuraray, Japan), 4군을 Pyramid(Bisco, U.S.A), 5군을 Heliomolar(Vivadent, Germany)로 나누어 7일, 30일, 60일, 120일간 증류수에 넣어 $37^{\circ}C$에서 보관한 후 Instron 6022(Instron, U.K.)를 이용하여 압축강도와 굴곡강도를 측정하여 다음과 같은 결과를 얻었다. 1. 7일, 30일, 60일, 120일로 기간이 증가함에 따라 모든 군에서 압축강도가 감소하였다(p<0.05). 2. 7일, 30일, 60일, 120일로 기간이 증가함에 따라 모든 군에서 굴곡강도가 감소하였다(p<0.05). 3. Hybrid type인 1, 2, 3군에 비해 matrix 비율이 높은 microfine type인 5군이 강도가 낮았다.

Keywords