DOI QR코드

DOI QR Code

Free vibration analysis of multiple open-edge cracked beams by component mode synthesis

  • Kisa, M. (Cardiff School of Engineering, University of Wales) ;
  • Brandon, J.A. (Cardiff School of Engineering, University of Wales)
  • Published : 2000.07.25

Abstract

This study is an investigation of the effect of cracks on the dynamical characteristics of a cantilever beam, having multiple open-edge transverse cracks. The flexibilities due to crack have been identified for several crack depths and locations. In the study the finite element method and component mode synthesis methods are used. Coupling the components is performed by a flexibility matrix taking into account the interaction forces. Each component is modelled by cantilever beam finite elements with two nodes and three degrees of freedom at each node. The results obtained lead to conclusion that, by using the drop in the natural frequencies and the change in the mode shapes, the presence and nature of cracks in a structure can be detected. There is some counter-evidence, however, that the effects due to multiple cracks may interact to make detection more difficult than for isolated cracks.

Keywords

References

  1. Abraham, O.N.L. (1993), "Dynamic modelling of cracked Timoshenko beams", Ph.D Thesis, University of Wales, Cardiff.
  2. Abraham, O.N.L. and Brandon J.A. (1995), "The modelling of the opening and closure of a crack", J. Vibr. AcousticsTrans. ASME, 117, 370-377. https://doi.org/10.1115/1.2874463
  3. Brandon, J.A. (1991), Strategies for Structural Dynamic Modification, Research Studies Press, Taunton, England.
  4. Brandon, J.A. (1997), "A critique of location criteria in modal methods for structural damage identification", J. Sound Vibr., 203(4), 728-9. https://doi.org/10.1006/jsvi.1996.0883
  5. Brandon, J.A. (1996), "Nonlinear vibration of cracked structures: The practical implications of some recent research results", 7th International Conference on Noise and Vibration Engineering, Leuven, 1045-1056
  6. Brandon, J.A. (1998), "Some insights into the dynamic of defective structures", Proc. I.Mech.E. Journal of Mechanical Engineering Science, 212(C7), 441-454. https://doi.org/10.1243/0954406981521358
  7. Brandon, J.A and Abraham O.N.L. (1995), "Counter-intuitive quasi-periodic motion in the autonomous vibration of cracked Timoshenko beams", J. Sound Vibr., 185, 415-430. https://doi.org/10.1006/jsvi.1995.0389
  8. Cawley, P. and Adams, R.D. (1979), "The location of defects in structures from measurements of natural frequencies", J. Strain Analysis, 14, 49-57. https://doi.org/10.1243/03093247V142049
  9. Chondors, T.G. and Dimarogonas, A.D. (1980), "Identification of cracks in welded joints of complex structures", J. Sound Vibr., 69, 531-538. https://doi.org/10.1016/0022-460X(80)90623-9
  10. Dimarogonas, A.D. (1996), "Vibration of cracked structures: a state of the art review", Engineering Fracture Mechanics, 55(5), 831-857. https://doi.org/10.1016/0013-7944(94)00175-8
  11. Doebling, S.W., Farrar, C.R, Prime, M.B. and Shevitz, D.W. (1996), "Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review", Report LA-13070-MS, Los Alamos National Laboratory, New Mexico.
  12. Ewins, D.J. (1984), Modal testing: Theory and Practice, Research Studies Press, England.
  13. Ghlaim, K.H. (1984), "Modal techniques in system approximation", PhD Thesis, University of Wales, Cardiff.
  14. Gouranis, G. and Dimarogonas, A.D. (1988), "A fmite element of a cracked prismatic beam for structural analysis", Comput. Structures, 28, 309-313. https://doi.org/10.1016/0045-7949(88)90070-3
  15. Gudmundson, P. (1982), "Eigenfrequency changes of structures due to cracks, notches or other geometrical changes", J. Mech. Phys. Solids, 30, 339-353. https://doi.org/10.1016/0022-5096(82)90004-7
  16. Gudmundson, P. (1983), "The dynamic behaviour of slender structures with cross-sectional cracks", J. Mech. Phys. Solids, 31, 329-345. https://doi.org/10.1016/0022-5096(83)90003-0
  17. Hu, J. and Liang, R.Y. (1993), "An integrated approach to detection of cracks using vibration data", Journal of the Franklin Institute, 330, 841-853. https://doi.org/10.1016/0016-0032(93)90080-E
  18. Hurty, W.C. (1965), "Dynamic analysis of structures using substructure modes", A.I.A.A. J., 3, 678-685.
  19. Kisa, M., Brandon, J.A. and Tupku, M. (1998), "Free vibration analysis of cracked beams by a combination of finite elements and component synthesis methods", Comput. Structures, 67, 215-223. https://doi.org/10.1016/S0045-7949(98)00056-X
  20. Liang, R.Y., Hu, J. and Choy, F. (1992), "Quantitative NDE techniques for assessing damage in beam structures", Journal of Engineering Mechanics, 113(7), 1468-1487.
  21. Mares, C., Ruotolo, R. and Surace, C. (1999), "Using transmissibility data to assess structural damage", Key Engineering Materials, 167-8, 236-245.
  22. Mottershead, J.E. and Friswell, M.I. (1993), "Model updating in structural dynamics: a survey", J. Sound Vibr., 167(2), 347-375. https://doi.org/10.1006/jsvi.1993.1340
  23. Mottershead, J.E., Friswell, M.I., Ng, G.T.H. and Brandon, J.A. (1996), "Geometric parameters for finite element model updating of joints and constraints", Mechanical Systems and Signal Processing, 10(2), 171-182. https://doi.org/10.1006/mssp.1996.0012
  24. Ostachowicz, W.M. and Krawczuk, M. (1991), "Analysis of the effects of cracks on the natural frequencies of a cantilever beam", Journal of Sound and Vibration, 150, 191-201. https://doi.org/10.1016/0022-460X(91)90615-Q
  25. Qian, G.L., Gu, S.N. and Jiang, J.S. (1990), "The dynamic behaviour and crack detection of a beam with a crack", J. Sound Vibr., 138, 233-243. https://doi.org/10.1016/0022-460X(90)90540-G
  26. Ruotolo, R., Surace, C., Crespo, P. and Storer, D. (1996), "Harmonic analysis of the vibrations of a cantilevered beam with a closing crack", Comput. Structures, 61, 1057-1074. https://doi.org/10.1016/0045-7949(96)00184-8
  27. Papadopoulos, C.A. and Dimarogonas, A.D. (1987), "Coupled longitudinal and bending vibrations of a rotating shaft with an open crack", J. Sound Vibr., 117, 81-93. https://doi.org/10.1016/0022-460X(87)90437-8
  28. Petyt, M. (1990), Introduction to Finite Element Vibration Analysis, Cambridge University Press, Great Britain.
  29. Shen, M.H.H. (1990), ''Natural modes of Bernoulli-Euler beams with symmetric cracks", J. Sound Vibr., 138, 115-134. https://doi.org/10.1016/0022-460X(90)90707-7
  30. Shen, M.H.H. and Taylor, J.E. (1991), "An identification problem for vibrating cracked beams", J. Sound Vibr., 150, 457-484. https://doi.org/10.1016/0022-460X(91)90898-T
  31. Shen, M.H.H. and Chu, Y.C. (1992), "Vibrations of beams with a fatigue crack", Comput. Structures, 45, 79-93. https://doi.org/10.1016/0045-7949(92)90347-3
  32. Springer, W.T., Lawrence, K.T. and Lawley, T.J. (1988), "Damage assessment based on the structural frequency-response function", J. Experimental Mechanics, 28(1), 34-37. https://doi.org/10.1007/BF02328993
  33. Wendtland, D. (1972), "Anderungen der Biegeeigenfrequenzen einer idealisierten schaufel durc risse", PhD thesis, Universitat Karlsruhe.

Cited by

  1. Free vibration analysis of a cantilever composite beam with multiple cracks vol.64, pp.9, 2004, https://doi.org/10.1016/j.compscitech.2003.11.002
  2. Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements vol.281, pp.1-2, 2005, https://doi.org/10.1016/j.jsv.2004.03.035
  3. Effect of Damage Parameters on Vibration Signatures of a Cantilever Beam vol.38, 2012, https://doi.org/10.1016/j.proeng.2012.06.384
  4. Free vibration analysis of uniform and stepped cracked beams with circular cross sections vol.45, pp.2-8, 2007, https://doi.org/10.1016/j.ijengsci.2007.03.014
  5. Modal analysis of cracked cantilever composite beams vol.20, pp.2, 2005, https://doi.org/10.12989/sem.2005.20.2.143
  6. Modal analysis of multi-cracked beams with circular cross section vol.73, pp.8, 2006, https://doi.org/10.1016/j.engfracmech.2006.01.002
  7. Multiple cracks effects and identification vol.22, pp.4, 2008, https://doi.org/10.1016/j.ymssp.2007.11.008
  8. Detection of multiple cracks using frequency measurements vol.70, pp.12, 2003, https://doi.org/10.1016/S0013-7944(02)00121-2
  9. Crack identification based on Kriging surrogate model vol.41, pp.1, 2000, https://doi.org/10.12989/sem.2012.41.1.025
  10. Vibration analysis of a cracked beam with axial force and crack identification vol.9, pp.4, 2000, https://doi.org/10.12989/sss.2012.9.4.355
  11. Vibration and stability of axially loaded cracked beams vol.44, pp.3, 2000, https://doi.org/10.12989/sem.2012.44.3.305