Journal of Mechanical Science and Technology

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Curing Induced Residual Stresses in Laminated Cylindrical Shells

  • Lee, Soo-Yong (Department of Aeronautical & Mechanical Engineering, Hankuk Aviation University)
  • Published : 2000.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

A viscoelastic finite element analysis is presented to investigate residual stresses occurred in a laminated cylindrical shell during cure. An incremental viscoelastic constitutive equation that can describe stress relaxation during the cure is derived as a recursive formula which can be used conveniently for a numerical analysis. The finite element analysis program is developed on the basis of a 3-D degenerated shell element and the first order shear deformation theory, and is verified by comparing with an one dimensional exact solution. Viscoelastic effect on the residual stresses in the laminated shell during the cure is investigated by performing both the viscoelastic and linear elastic analyses considering thermal deformation and chemical shrinkage simultaneously. The results show that there is big difference between viscoelastic stresses and linear elastic stresses. The effect of cooling rates and cooling paths on the residual stresses is also examined.

Keywords

References

  1. Bathe, K. J., 1982, Finite Element Procedures in Engineering Analysis, Prentice Hall
  2. Bogetti, T. A. and Gillespie, Jr. J. W., 1992, 'Process-induced Stress and Deformation in Thick -Section Thermoset Composite Laminate,' Journal of Composite Materials, Vol. 26, pp. 626 -660 https://doi.org/10.1177/002199839202600502
  3. Chao, W. C. and Reddy, J. N., 1984, 'Analysis of Laminated Composite Shells Using a Degenerated 3-D Element,' International Journal for Numerical Methods in Engineering, Vol. 20, pp. 1991-2007 https://doi.org/10.1002/nme.1620201104
  4. Dusi, M. R., Lee, W. I., Ciriscioli, P. R. and Springer, G. S., 1987, 'Cure Kinetics and Viscosity of Fiberite 976 Resin,' Journal of Composite Materials, Vol. 21, pp. 243-26l https://doi.org/10.1177/002199838702100304
  5. Flaggs, D. L. and Crossman, F. W., 1981, 'Analysis of the Viscoelastic Response of Composite Laminates During Hygrothermal Exposure,' Journal of Composite Materials, Vol. 15, pp. 21-40 https://doi.org/10.1177/002199838101500103
  6. Hahn, H. T. and Pagano, N. J., 1975, 'Curing Stress in Composite Laminates,' Journal of Composite Materials, Vol. 9, pp. 91-105
  7. Henriksen, M., 1984, 'Nonlinear Viscoelastic Stress Analysis-A Finite Element Approach,' Computers & Structures, Vol. 18, pp. 133-139
  8. Hodges, J., Yates, B., Darley, M. I., Wostenholm, G. H., Clement, J. F. and Keates, T. F., 1989, 'Residual Stresses and the Optimum Cure Cycle for an Epoxy Resin,' Journal of Material Science, Vol. 24, pp. 1984-1990 https://doi.org/10.1007/BF02385410
  9. Kennedy, T. C. and Wang, M., 1994, 'ThreeDimensional Nonlinear Viscoelastic Analysis of Laminated Composites,' Journal of Composite Materials, Vol. 28, pp. 121-132
  10. Kim, Y. K., 1996, 'Process-Induced Viscoelastic Residual Stress Analysis of Graphite-Epoxy Composite Structures,' Ph. D. Dissertation, Department of Aeronautical and Astronautical Engineering, University of Illinois at UrbanaChampaign
  11. Lee, S. Y. and Springer, G. S., 1988, 'Effect of Cure on the Mechanical Properties of Composites,' Journal of Composite Materials, Vol. 22, pp. 15-29 https://doi.org/10.1177/002199838802200102
  12. Lee, W. I., Loos, A. C. and Springer, G. S., 1982, 'Heat of Reaction, Degree of cure, and Viscosity of Hercules 3501-6 Resin,' Journal of Composite Materials, Vol. 16, pp. 510-520 https://doi.org/10.1177/002199838201600605
  13. Lin, K. Y. and Hwang, I. H., 1989, 'ThermoViscoelastic Analysis of Composite Materials,' Journal of Composite Materials, Vol. 23, pp. 554 -569
  14. Lin, K. Y. and Yi, S., 1991, 'Analysis of Inter-laminar Stresses in Viscoelastic Composites,' International Journal of Solids and Structures, Vol. 27, pp. 929-945
  15. Panda, S. C. and Natarajan, R., 1981, 'Analysis of Laminated Composite Shell Structures by Finite Element Method,' Computers & Structures, Vol. 14, pp. 225-230
  16. Roy, S. and Reddy, J. N., 1988, 'Finite Element Models of Viscoelasticity and Diffusion in Ad-hesively Bonded Joints,' International Journal for Numerical Methods in Engineering, Vol. 26, pp. 2531- 2546 https://doi.org/10.1002/nme.1620261111
  17. Schapery, R. A., 1967, 'Stress Analysis of Viscoelastic Composite Materials,' Journal of Composite Materials, Vol. 1, pp. 228-267 https://doi.org/10.1177/002199836700100302
  18. Tuttle, M. E. and Brinson, H. F., 1986, 'Prediction of the Long-Term Creep Compliance of General Composite Laminates,' Experimental Mechanics, Vol. 26, pp. 89-102 https://doi.org/10.1007/BF02319961
  19. White, S. R. and Hahn, H. T., 1992, 'Process Modelling of Composite Materials: Residual Stress Development during Cure. Part I. Model Formulation,' Journal of Composite Materials, Vol. 26, pp. 2402-2422 https://doi.org/10.1177/002199839202601604
  20. White, S. R. and Hahn, H. T., 1992, 'Process Modelling of Composite Materials: Residual Stress Development during Cure. Part ll. Experimental Validation,' Journal of Composite Materials, Vol. 26, pp. 2423 - 2453 https://doi.org/10.1177/002199839202601605