References
- Bauchau, O. A., and Hong, C., 1987, 'Finite-Element Approach to Rotor Blade Modeling,' Journal of the American Helicopter Society, pp. 60-67
- Chandra, R., and Chopra, I., 1992, 'Experimental- Theoretical Investigation of the Vibration Characteristics of Rotating Composite Box Beams,' Journal of Aircraft, Vol. 29, No.4, pp. 657-664
- Giavotto, V., Borri, M., Mantegazza, P., and Ghiringhelli, G., 1983, 'Anisotropy Beam Theory and Applications,' Computer & Structures, Vol. 16, No. 14, pp. 403-413 https://doi.org/10.1016/0045-7949(83)90179-7
- Hodges, D. H., 1979, 'An Aeromechanical Stability Analysis for Bearingless helicopter Rotor Blades,' Journal of the American Helicopter Society, Vol. 114, pp. 57-73
- Hodges, D. H., 1990, 'Review of Composite Rotor Blade Modeling,' AIAA Journal, pp. 561 -565
- Joo, J., 1993, 'An Experimental Study on the Dynamic Characteristics of a Hingeless Rotor in Hover,' Ph. D. Dissertation, Dept. of Aerospace Engineering, Seoul National University
- Jung, S. N., and Kim, S. J., 1996, 'Transverse Shear Behavior on the Aeroelastic Stability of Composite Rotor Blades,' KSME Journal, Vol. 10, No.1, pp. 12-21
- Jung, S. N., 1993, 'Finite Element Analysis in the Aeroelastic Stability of Composite Helicopter Rotor Blades,' Ph. D. Dissertation, Dept. of Aerospace Engineering, Seoul National University
- Kardestuncer, H., and Norrie, D. H., 1987, Finite Element Handbook, McGraw-Hill, pp. 4.183-4.189
- Pinkey, R. L., 1974, 'Helicopter Rotor Blade, Application of Composite Materials,' ASTM STP 524, pp. 57-60
- Rapp, H., and Wondle, R., 1992, 'Influence of Cross Section Variation on Structural Behavior of Composite Rotor Blades,' 48th Annual Forum of the American Helicopter Society, Washington D. C., pp. 3-10
- Wondle, R., 1982, 'Calculation of the Cross Section Properties and the Shear Stress of Composite Rotor Blades,' Vertica, Vol. 6, pp. 111-129
- Yoo, H. H., Pierre, C., and Ryan, R. R., 1997, 'A New Formulation for the Torsional vibration Analysis of Rotating Cantilever rods,' KSME International Journal, Vol. 11, No.2, pp. 143 -154
- Yu, Y., Chung, K., and Oh, T., 1995, 'Determination on the Cross Sectional Properties of Composite Rotor Blade,' Proceedings of the KSME Spring Annual Meeting '95, pp. 354-359
- Yu, Y., Oh, T., and Choi, M., 1996, 'Effect of Ply Angle on the Cross Sectional Properties of Composite Rotor Blade,' Proceedings of Asian Pacific Conference for Fracture and Strength' 96, pp. 621-624