Behaviors of Anisotropic Fluids in the Vicinity of a Wedge

  • Kim, Youn-J. (School of Mechanical Engineering, Sungkyunkwan University)
  • Published : 2000.06.01

Abstract

The laminar boundary layer flow and heat transfer of anisotropic fluids in the vicinity of a wedge have been examined with constant surface temperature. The similarity variables found by Falkner and Skan are employed to reduce the stream wise-dependence in the coupled nonlinear boundary layer equations. The numerical solutions are presented using the fourth-order Runge - Kutta method and the distribution of velocity, micro-rotation, shear and couple stresses and temperature across the boundary layer are plotted. These results are also compared with the corresponding flow problems for Newtonian fluid over wedges. It is found that for a constant wedge angle, the skin friction coefficient is lower for micropolar fluid, as compared to Newtonian fluid. For the case of the constant material parameter K, however, the magnitude of velocity for anisotropic fluid is greater than that of Newtonian fluid. The numerical results also show that for a constant wedge angle with a given Prandtl number, Pr = I, the effect of increasing values of K results in increasing thermal boundary layer thickness for anisotropic fluid, as compared with Newtonian fluid. For the case of the constant material parameter K, however, the heat transfer rate for anisotropic fluid is lower than that of Newtonian fluid.

Keywords

References

  1. Ahmadi, G., 1976, 'Self-Similar Solution of Incompressible Micropolar Boundary Layer Flow over a Semi-Infinite Plate,' Int. J. Engng Sci., Vol. 14, pp. 639-646 https://doi.org/10.1016/0020-7225(76)90006-9
  2. Ariman, T., 1971, 'On the Analysis of Blod Flow,' J. Biomech., Vol. 4, pp. 185-192 https://doi.org/10.1016/0021-9290(71)90003-0
  3. Bergholz, R. F., 1980, 'Natural Convection of a Heat Generating Fluid in a Closed Cavity,' J. Heat Transfer, Vol. 102, pp. 242-247
  4. Shekar, C. B., Vasseur, P., Robillard, L. and Nguyen, T. H., 1984, 'Natural Convection in a Heat Generating Fluid Bounded by Two Horizontal Concentric Cylinders,' Can. J. Chem. Engng., Vol. 62, pp. 482-489
  5. Emara, A. A. and Kulacki, F. A., 1980, 'A Numerical Investigation of Thermal Convection in a Heat-Generating Fluid Layer,' J. Heat Transfer, Vol. 102, pp. 531-537
  6. Eringen, A. C., 1966, 'Theory of Micropolar Fluids,' J. Math, Mech., Vol. 16, pp. 1-18
  7. Eringen, A. C., 1972, 'Theory of Thermomicrofluids,' J. Math. Analysis Applic., Vol. 38, pp. 480-496 https://doi.org/10.1016/0022-247X(72)90106-0
  8. Falkner, A. C. and Skan, S. W., 1931, 'Some Approximate Solutions of the Boundary Layer Equations,' Phil. Mag., Vol. 12, No. 7, pp. 865-896
  9. Gorla, R. S. R., 1980, 'Thermal Boundary Layer of a Micropolar Fluid at a Stagnation Point,' Int. J. Engng Sci., Vol. 18, pp. 611-617
  10. Gorla, R. S. R., 1984, 'The Axisymmetric Micropolar Boundary Layer on a Long Thin Cylinder.' Int. J. Engng Sci., Vol. 22, pp. 293-299
  11. Gorla, R. S. R., 1985, 'Axisymmetric Thermal Boundary Layer of a Micropolar Fluid on a Cylinder,' Int. J. Engng Sci., Vol. 23, pp. 401-407
  12. Rees, D. A. S. and Bassom, A. P., 1996, 'The Blasius Boundary-Layer Flow of a Micropolar Fluid,' Int. J. Engng Sci., Vol. 34, No. 1, pp. 113-124 https://doi.org/10.1016/0020-7225(95)00058-5
  13. Willson, A. J., 1970, 'Boundary Layers in Micropolar Liquids,' Proc. Comb. Philol. Soc., Vol. 67, pp. 469-476