References
- Barker, R. W. and Hinich, M. J., 1994, 'Statistical Monitoring of Rotating Machinery by Cumulant Spectral Analysis,' in Proc. of the SPIE, San diego, CA, USA, Vol. 2296, pp. 43-51 https://doi.org/10.1117/12.190854
- Belousov, Y. I. and Rimskii-Korsakov, A. V., 1975, 'The Reciprocity Principle in Acoustics and Its Application to the Calculation of Sound Fields of Bodies,' Sov. Phys. Acoust., Vol. 21, No. 2, pp. 103-109
- Bradley, J. S., 1993, 'Disturbance Caused by Residential air Conditioner Noise,' J. Acoustic. Soc. Am., Vol. 94 https://doi.org/10.1121/1.406858
- Cann, R. G., 1992, 'New Diagnostic Procedures for Locating Faults in Diesel Engines, 'Diesel and Gas Turbine Worldwide, Vol. 24, No. 6, pp. 52-55
- Comparin, R. J., 1994, 'Vibration Isolation for Noise Control in Residential Condensing Units,' in Proc. International Compressor Engineering Conference, Purdue Univ., West Lafayette, IN, USA
- Faulkner, L. L., 1976, Handbook of Industrial Noise Control, Industrial Press Inc., New York, NY, USA
- Ha, H. T. R., 1994, 'Vibration Control of Rotor,' KSME, Vol. 35, No. 10, pp. 917-923, 1225-5955
- Harrap, M. J. and Wang, W. Y., 1994, 'Vibration Analysis Techniques Used if Machinery fault detection,' Acoustics Australia, Vol. 22, No. 3, pp. 91-95
- Kinsler, L. E., Frey A. R., Coppens, A. B. and Sanders, J. V., 1982, Fundamental of Acoustics, John Wiley & Sons, 3rd edition
- Lou, K. N., Sherman, P. J., and Lyon, D. E., 1993, 'System Identification and Coherence Analysis in the Presence of a Harmonic Signal,' Mechanical Systems and Signal Processing, vol. 7, no. 1, pp. 13-27 https://doi.org/10.1016/0888-3270(93)90002-E
- Meng, Quingfeng and Qu, Liangsheng, 1991, 'Rotating Machinery Fault Diagnosis Using Wigner Distribution,' Mechanical Systems and Signal Processing, Vol. 5, No. 3, pp. 155-166 https://doi.org/10.1016/0888-3270(91)90040-C
- Oh, J. Y., 1993, 'The Active Noise Control in Harmonic Enclosed Sound Fields (I) : Computer Simulation,' KSME, Vol. 17, No. 5, pp. 1054-1065, 1225-5963
- Rantala, S. and Suoranta, R., 1991, 'Enhanced Vibration Monitoring Using Parametric Modelling Techniques,' in Proc. of IEEE intrumentation and Measurement Technology Conference, Atlanta, GA, USA https://doi.org/10.1109/IMTC.1991.161526
- Smith, D. G., Amold, M. F., Ziegler, Jr. E. W., and Brown, M., 1992, 'A Systems Approach to Appliance Compressor Quieting Using Active Noise Control Techniques,' in Proc. International Compressor Engineering Conference, Purde Univ., West Lafayette, IN, USA
- Tamaki, K., Matsuoka, Y., Uno, M., and Kawana, T., 1995, 'Wavelet Transform Based Signal Waveform Discrimination for Inspection of Rotating Machinery,' Transactions of the Institute of Electrical Engineers of Japan, Part D, Vol. 115-D, No. 6, pp. 775-783
- Ten Wolde, T., 1973, Reciprocity Experiments on the Transmission of Sound in Ships, PhD thesis, Delft University
- Ten Wolde, T., 1976, 'Reciprocity Measurement of Acoustical Source Strength in an Arbitrary Surrounding,' Nosie Control Engineering, pp. 16-23
- Wagner, T. and Peracchio, A., 1996, 'A Reciprocity-Based Technique for Ranking Source/Path Contribution to source Vibration and Radiated Noise,' NOISE-CON 96, Bellevue, WA, USA
- Young, D. L., 1994, 'Source Identification and Advanced Signal Processing Methods: User's Guide,' Tech. Rep. UTRC 94-37, Advanced Compressor Technology, United Technologies Research Center, E. Hartford, CT