대한기계학회논문집B (Transactions of the Korean Society of Mechanical Engineers B)

  • 제24권5호
  • /
  • Pages.709-717
  • /
  • 2000
  • /
  • 1226-4881(pISSN)
  • /
  • 2288-5324(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

공회전에서 스파크 점화기관 연소의 사이클 변동 해석

Analysis of the Cyclic Variability in SI Engine at Idling

  • 발행 : 2000.05.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Cyclic variability has long been recognized as limiting the range of operating conditions of spark ignition engines, in particular, under lean and highly diluted operation conditions. The cyclic combustion variations can be characterized by the pressure parameters, combustion parameters, and flame front parameters. The coefficient of variation in indicated mean effective pressure ($COV_{IMEP}$) defines the cyclic variability in indicated work per cycle, and it has been found that vehicle driveability problems usually result when $COV_{IMEP}$ exceeds about 10%. For analysis of the cyclic variability in SI engines at idling, the results show that cyclic variability by the $COV_{IMEP}$ or the coefficient of variation in maximum pressure can be explained and may be consequently reduced by the help of the optimum spark timings.

키워드

참고문헌

  1. Sztenderowicz, M. L. and Heywood, J. B., 1990, 'Cycle-to-Cycle IMEP Fluctuations in a Stoichiometrically-Fueled S.I. Engine at Low Speed and Load,' SAE Paper 902143
  2. Ozdor, N., Dulger, M. and Sher, E., 1994, 'Cyclic Variability in Spark Ignition Engines A Literature Survey,' SAE Paper 940987
  3. Shen, H., Hinze, P. C. and Heywood, J. B., 1994, 'A Model for Flame Initiation and Early Development in SI Engine and its Application to Cycle-to-Cycle Variations,' SAE Paper 942049
  4. Hoard, J. and Rehagen, L., 1997, 'Relating Subjective Idle Quality to Engine Combustion,' SAE Paper 970035
  5. Han, S. B., and Chung, Y. J., 1998, 'A Study on the Effect of Operating Conditions for the Stability at Idle,' KSME International Journal, Vol. 12, No. 4, pp. 694-700
  6. Randolph, A. L., 1994, 'Cylinder - Pressure - Based Combustion Analysis in Race Engine,' SAE Paper 942487
  7. Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill International Editions
  8. Hinze, P. C., 1993, 'A Study of Fuel Effects on Early Flame Development in a Spark Ignition Engine,' MIT Thesis
  9. Meyer, R., Kubesh, J. T. and Shahed, S. M., 1993, 'Simultaneous Application of Optic Spark Plug Probe and Head Gasket Ionization Probe to a Production Engine,' SAE Paper 930464
  10. Kerstein, A. R. and Witze, P. O., 1990, 'Flame-Kernel Model for Analysis of Fiber-Optic Instrumented Spark Plug Data,' SAE Paper 900022
  11. Shen, H., Hinze, P. C. and Heywood, J. B., 1996, 'A Study of Cycle-to-Cycle Variations in SI Engines Using a Modified Quasi - Dimensional Model,' SAE Paper 961187
  12. 이종화, 김응서, 1993, '전기점화기관에서 연소의 사이클 변화측정 및 해석' 한국자동차공학회지, Vol. 14, No. 3, pp. 90-101
  13. Brown, A. G., Stone, C. R. and Beckwith, P., 1996, 'Cycle-by-Cycle Variation in Spark Ignition Engine Combustion - Part I: Flame Speed and Combustion Measurements and a Simplified Turbulent Combustion Model,' SAE Paper 960612
  14. Cheung, H. M., 1993, 'A Practical Burn Rate Analysis for Use in Engine Development and Design,' MIT Thesis
  15. Cheung, H. M. and Heywood J. B., 1993, 'Evaluation of a One-Zone Burn-Rate Analysis Procedure Using Production SI Engine Pressure Data,' SAE paper 932749
  16. Woschni, G., 1967, 'Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,' SAE Paper 670931
  17. Kaplan, J. A. 1990, 'Modeling the Spark Ignition Engine Warm-up Process to Predict Component Temperature,' MIT Thesis
  18. Poulos, S. G. and Heywood, J. B., 1983, 'The Effect of Chamber Geometry on Spark-Ignition Engine,' SAE Paper 830587
  19. Brunt, M. F. J., 1996, 'Evaluation of IMEP Routines and Analysis Errors,' SAE Paper 960609