References
- Wendt, B. J. and Hingst, W. R., 1994, 'Flow Structure in the Wake of a Wishbone Vortex Generator,' AIAA Journal, Vol. 32, No. 11, pp. 2234-2240
- Deb, P., Biswas, G., and Mitra, N. K., 1995, 'Heat Transfer and Flow Structure in Laminar and Turbulent Flows in a Rectangular Channel with Longitudinal Vortices,' International Journal of Heat and Mass Transfer, Vol. 38, No. 13, pp. 2427-2444 https://doi.org/10.1016/0017-9310(94)00357-2
- Pauley, W. R. and Eaton, J. K., 1988, 'Experimental Study of the Development of Longitudinal Vortex Pairs Embedded in a Turbulent Boundary Layer,' AIAA Journal Vol. 26, No. 7, pp. 816-823
- Wendt, B. J., Grebert, I., and Hingst, W. R., 1993, 'Structure and Development of Streamwise Vortex Arrays Embedded in a Turbulent Boundary Layer,' AIAA Journal, Vol. 31, No. 2, pp. 319-325
- Reichert, B. A. and Wendt, B. J., 1993, 'An Experimental Investigation off S-Duct Flow Control Using Arrays of Low Profile Vortex Generations,' AIAA Paper 93-0019
- Eibeck, P. A. and Eaton, J. K., 1987, 'Heat Transfer Effects of a Longitudinal Vortex Embedded in a Turbulent Boundary layer,' ASME Journal of Heat Transfer, Vol. 109, pp. 16-24
- Fiebig, M., 1997, 'Vortices and Heat Transfer,' Zeitschrift fur Angewandte Mathematik und Mechanik, Vol. 77, No. 1., pp. 3-18 https://doi.org/10.1002/zamm.19970770103
- Zhu, J. X., Fiebig, M., and Mitra, N. K., 1995, 'Numeracal Investigation of Turbulent Flows and Heat Transfer in a Rib-Roughened Channel with Longitudinal Vortex Generators,' International Journal of Heat and Mass Transfer, Vol. 38, No. 3, pp. 495-501 https://doi.org/10.1016/0017-9310(94)00177-W
- Camci, C., Kim K., Hippensteele, S. A., and Pointsatti, P. E., 1993, 'Evaluation of a Hue Capturing Based Transient Liquid Crystal Method for High-Resolution Mapping of Convective Heat Transfer on Curved Surfaces,' ASME Journal of Heat Transfer, Vol. 115, pp. 311-318
- Akino, N., Kunugi, T., Ichimiya, K. Mitsushiro, K., and Usda, M. 1989, 'Improved Liquid-Crystal Thermometry Excluding Human Color Sensation,' ASME Journal of Heat Transfer, Vol. 111, pp. 558-565
- Hippensteele, S. A., Russell, L. M. and Torres, F. J., 1985, 'Local Heat Transfer Measurements on a Large Scale-Model Turbine Blade Airfoil Using A Composite of a Heat Element and Liquid Crystals,' ASME Journal of Engineering for Gas Turbines and Power, Vol. 107, pp. 953-960
- 양장식, 나종문, 이기백, 1995, '선형 터빈 케스케이드 끝벽의 열전달 특성에 관한 연구,' 대한기계학회, 제19권, 제9호, pp. 2386-2398
- 윤정환, 도덕희, 이상준, 1996, 'TLC와 컬러 화상처리를 이용한 Hele_Shaw Cell내부 대류 온도장 측정,' 대한기계학회논문집(B), 제20권, 제3호, pp. 1114-1122
- 이기백, 김태영, 양장식, 1997, '색상포착기법과 수치 계산을 이용한 3차원 밀폐 공간 내의 자연 대류 연구,' 대한기계학회논문집(B), 제21권, 제12호, pp. 1595-1607
- 이기백, 양장식, 1995, 'Cubic Spline 보간법을 이용한 5공 프로브의 보정과 그응용,' 한국항공우주공학회지, 제 23권, 제 2호, pp. 61-68
- 한동주, 1999, '종방향 와동쌍의 상호작용과 유동특성에 관한 연구,' 부산대학교 석사학위논문
- Westphal, F. V., Pauley, W. R., and Eaton, J. K., 1987, 'Interaction Between a Vortex and a Turbulent Boundary Layer-Part 1: Mean Flow Evolution and Turbulence Properties,' NASA TM 88361
- Holman, J. P., 1984, Experimental Methods for Engineers, McGrew-Hill
- Abernethy, R. B., Benedict, R. P., and Dowdell, R. B., 1985, 'ASME Measurement Uncertainty,' ASME Journal of Fluids Engineering, Vol. 107, pp. 161-164