TENSILE BOND STRENGTH BETWEEN NON-PRECIOUS DENTAL ALLOY AND VENEERING REINFORCED COMPOSITE RESINS

치과용 비귀금속 합금과 전장용 강화형 복합레진의 인장결합강도

  • Yang, Byung-Duk (Department of Prosthodontics and Institute for Oral Bio Science, School of Dentistry, Chonbuk National University) ;
  • Park, Ju-Mi (Department of Prosthodontics and Institute for Oral Bio Science, School of Dentistry, Chonbuk National University) ;
  • Ko, Sok-Min (Department of Prosthodontics and Institute for Oral Bio Science, School of Dentistry, Chonbuk National University) ;
  • Kang, Geon-Gu (Department of Prosthodontics and Institute for Oral Bio Science, School of Dentistry, Chonbuk National University)
  • 양병덕 (전북대학교 치과대학 치과보철학교실 및 구강생체과학연구소) ;
  • 박주미 (전북대학교 치과대학 치과보철학교실 및 구강생체과학연구소) ;
  • 고석민 (전북대학교 치과대학 치과보철학교실 및 구강생체과학연구소) ;
  • 강건구 (전북대학교 치과대학 치과보철학교실 및 구강생체과학연구소)
  • Published : 2000.05.01

Abstract

Recently the 2nd generation laboratory composite resins were introduced. Although the mechanical properties of these composite resins have been improved, there were some disadvantages such as discoloration, low abrasion resistance and debonding between metal and resin. The purpose of this study was to evaluate the tensile bond strength between non-pecious dental alloy(verabond) and four veneering reinforced composite resins ; Targis(Ivoclar Co., U.S.A.), Artglass(Kulzer CO., Germany), Sculpture(Jeneric Pentron Co., U.S.A.), and Estonia(Kurary Co., Japan). All test metal specimens were polished with #1,000 SiC paper, and sandblasted with $250{\mu}m$ aluminum oxide. After then. according to manufacturer's instructions metal adhesive primer and veneering resins were applied. All test specimens were divided into two groups. One group was dried in a desiccator at $25^{\circ}C$ for 3 days, the other group was subjected to thermal cycling($2,000{\times}$) in water($5/55^{\circ}C$). Tensile bond strength was measured using Instron Universal Testing machine and the fractured surface was examined under the naked eyes and scanning electron microscope. Within the limitations imposed in this study, the following conclusions can be drawn: 1. In no-thermal cycling groups, there were no significant differences between Estenia and VMK68 but there were significant differences between Targis, Artglass, Sculpture and VMK68(p<0.05). 2. In no-thermal cycling resin groups, the highest tensile bond strength was observed in Estenia and there were significant differences between Estenia and the other resins(p<0.05). 3. Before and after thermal cycling, there were significant differences in tensile bond strength of Targis and Artglass(p<0.05). The tensile bond strength of Artglass was decreased and that of Targis was increased. 4. In no-thermal cycling groups, Artglass showed mixed fracture modes(95%), but after thermal cycling, Artglass showed adhesive fracture modes(75%).

Keywords