한국주조공학회지 (Journal of Korea Foundry Society)
- 제20권5호
- /
- Pages.344-353
- /
- 2000
- /
- 1598-706X(pISSN)
- /
- 2288-8381(eISSN)
박육 스테인리스 주강에 대한 유동 및 응고해석의 실험적 고찰
Experimental Study of Flow and Solidification Simulation for Thin Wall Stainless Steel Castings
- Choi, Hak-Kyu (Chang-Won Polytechnic College) ;
- Park, Heung-Il (Pukyong National Univ.) ;
- Jeong, Hae-Yong (Pukyong National Univ.) ;
- Bae, Cha-Hurn (Pukyong National Univ.) ;
- Choi, Byung-Kang (Chun-Chon Polytechnic College)
- 발행 : 2000.10.20
초록
In order to find out the casting conditions of the thin wall stainless steel exhaust manifold for automobile, the melt flow and solidification behavior simulated by the Z-CAST program were evaluated, and experimental casting result on the test casting and exhaust manifold of SSC13 alloy were investigated. From the results of this study, it was shown that the calculated results on fluid flow were in good agreement with practical thin wall test castings under the same casting conditions, as pouring metal is austenitic stainless steel(SSC13) and pouring temperature is 1575, 1630, and
키워드