DOI QR코드

DOI QR Code

Experimental determination of the buckling load of a flat plate by the use of dynamic parameters

  • Go, Cheer Germ (Department of Civil Engineering, National Chung Hsing University) ;
  • Liou, Cheng Dar (Department of Civil Engineering, National Chung Hsing University)
  • Published : 2000.05.25

Abstract

After manufacturing a structure, the assembly of structural components is often not as perfect as expected due to the immaturity of current engineering techniques. Thus the actual buckling load for an element is sometimes not consistent with that predicted in the design. For design considerations, it is necessary to establish an analytical method for determining the buckling load experimentally. In this paper, a dynamic method is described for determining the linear buckling loads for elastic, perfectly flat plates. The proposed method does not require the application of in-plane loads and is feasible for arbitrary types of boundary conditions. It requires only the vibrational excitation of the plate. The buckling load is determined from the measured natural frequencies and vibration mode shapes.

Keywords

References

  1. Bisplinghoff, R.L., Ashley, H., Halfman, R.L., Aeroelasticity, Addison-Wesley Plublishing Company, Cambridge, Mass., 1955(BAH)
  2. Baruch, M. (I973), "Integral equations for nondestructive determination of buckling loads for elastic plate and bars", Israel Journal of Technology, 11, 1-8. https://doi.org/10.1002/ijch.197300002
  3. Go, C.G., Lin, Y.S. and Khor, E.H. (1997), "Experimental determination of the buckling load of a straight structural member by using dynamic parameters", Journal of Sound and Vibration , 205(3), 257-264. https://doi.org/10.1006/jsvi.1995.1047
  4. Ghali, A. and Neville, A.N. (1978), Structural Analysis, Champ man and Hall Ltd.
  5. Hillier, F.S. and Liberman, Q.J. (1974), Operations Research, Hoden-Day, San Francisco.
  6. Laura, P.A.A. and Rossi, R.E. (1989), "On the relative accuracy and relative difficulties of vibrations and buckling problems of structural elements", Journal of Sound and Vibration, 134(3), 381-387. https://doi.org/10.1016/0022-460X(89)90564-6
  7. Lurie, R. (1952), "Lateral vibration as related to structural stability", Journal of Applied Mechanics 19, 195-203.
  8. Sang, Z.T., Chang, K.C. and Lee, G.C. (1988), "A simple method for measuring local buckling of thin plates", Experimental Mechanics, 28, 20-23 . https://doi.org/10.1007/BF02328990
  9. Segall, A. and Springer, G.S. (1980), "A nondestructive dynamic method for determination of the critical load of elastic column", Experimental Mechanics, 20, 285-288. https://doi.org/10.1007/BF02328413
  10. Segall, A. and Springer, G.S. (1986), "A dynamjc Method for measuring the critical loads of elastic flat plate", Experimental Mechanics, 26, 354-359. https://doi.org/10.1007/BF02320151
  11. Sweet, A.L. and Genin, J. (1971), "Identification of a model for predicting elastic buckling", Journal of Sound and Vibration , 14, 317-324. https://doi.org/10.1016/0022-460X(71)90370-1
  12. Sweet, A.L., Genin, J. and Makar, P.F. (1976), "Vibratory identification of beam boundary conditions", Journal of Dynamic System, Measurement and Control, 98, 385-391.
  13. Sweet, A.L., Genin, J. and Makar, P.F. (1976), "Determination of column buckling criteria using vibratory data", Experimental Mechanics, 17, 385-391.
  14. Szilard Rudolph (1974), Theory and Analysis of Plates , Prentice-Hall, Englewood Cliffs, N.J.
  15. Timoshenko, S.P. and Gere, J.M. (1984), Theory of Elastic Stability, McGraw-Hill, New York.
  16. Zienkiewicz, O.C. and Taylor, R.L. (1989), The Finite Element Method, 1: Basic Formulation and Linear Problem. McGraw-Hill, New York.

Cited by

  1. Load-response determination for imperfect column using vibratory data vol.269, pp.3-5, 2004, https://doi.org/10.1016/S0022-460X(02)01641-3
  2. Experimental determination of the buckling load of rectangular plates using vibration correlation technique vol.37, pp.3, 2011, https://doi.org/10.12989/sem.2011.37.3.331