DOI QR코드

DOI QR Code

The inelastic buckling of varying thickness circular cylinders under external hydrostatic pressure

  • Ross, C.T.F. (Department of Mechanical & Manufacturing Engineering, University of Portsmouth) ;
  • Gill-Carson, A. (Department of Mechanical & Manufacturing Engineering, University of Portsmouth) ;
  • Little, A.P.F. (Department of Mechanical & Manufacturing Engineering, University of Portsmouth)
  • 발행 : 2000.01.25

초록

The paper presents theoretical and experimental investigations on three varying thickness circular cylinders, which were tested to destruction under external hydrostatic pressure. The five buckling theories that were presented were based on inelastic shell instability. Three of these inelastic buckling theories adopted the finite element method and the other two theories were based on a modified version of the much simpler von Mises theory. Comparison between experiment and theory showed that one of the inelastic buckling theories that was based on the von Mises buckling pressure gave very good results while the two finite element solutions, obtained by dividing the theoretical elastic instability pressures by experimentally determined plastic knockdown factors gave poor results. The third finite element solution which was based on material and geometrical non-linearity gave excellent results. Electrical resistance strain gauges were used to monitor the collapse mechanisms and these revealed that collapse occurred in the regions of the highest values of hoop stress, where considerable deformation took place.

키워드

참고문헌

  1. Bushnell, D. (1976), "BOSOR program for buckling of elastic-plastic complex shells of revolution, including large deflection and creep" Computers and Structures, 6, 221-239. https://doi.org/10.1016/0045-7949(76)90034-1
  2. Esslinger, M. and Geier, B. (1974), "Buckling loads of thin-walled circular cylinders with axisymmetric irregularities", Paper 36, Int. Conf. on 'Steel Plated Structures ', London.
  3. Malik, Z. Morton, J. and Ruiz, C. (1979), "An experimental investigation into the buckling of cylindrical shells of variable wall thickness under Radial external pressure", Experimental Mechanics, 36, 87-92.
  4. Rajagopalan, K. (1993), Finite Element Buckling Analysis of Stiffened Cylindeical Shells.
  5. Ross, C.T.F. (1990), Pressure Vessels under External Pressure, Chapman and Hall.
  6. Ross, C.T.F. (1970), "Axisymmetric deformation of a varying strength ring-stiffened cylinder under lateral and axial pressure", Trans RINA, 112, 113-117.
  7. Ross, C.T.F., Haynes, P., Seers, A. and Johns, T. (1995), "Plastic collapse of thin-walled ring-stiffened circular cylinders under uniform external pressure", Int. ASME Conference on Structural Dynamics & Vibration, PDColito, Houston, Texas.
  8. Salemo, V.L. and Pulos, J.G. (1951), "Stress distribution in a circular cylindrical shell under hydrostatic pressure supported by equally spaced circular ring frames", Polytechnic Institute of Brooklyn Report, No 171-A, June.
  9. Von Mises, R. (1929), "Der Kritische Aussendruck Fur Allisets Belastetc Zylindrische Rohre, Fest Zum 70", Geburststag von Prof. A Stodola, Zurich 418-30 (Also US DTMB Translation Report NO. 366, 1936).
  10. Wilson, L.B. (1956), "The deformation under uniform pressure of a circular cylindrical shell supported by equally spaced ring frames", NCRE Report No 337B, December.
  11. Windenburg, D.F. and Trilling, C. (1934), "Collapse by instability of thin cylindrical shells under external pressure", Trans. ASME, 11, 819-825.

피인용 문헌

  1. Review of studies on geometrically nonlinear vibrations and dynamics of circular cylindrical shells and panels, with and without fluid-structure interaction vol.56, pp.4, 2003, https://doi.org/10.1115/1.1565084
  2. Numerical studies of the failure modes of ring-stiffened cylinders under hydrostatic pressure vol.70, pp.4, 2000, https://doi.org/10.12989/sem.2019.70.4.431