Structural Engineering and Mechanics

  • 제10권3호
  • /
  • Pages.245-262
  • /
  • 2000
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Deformational characteristics of a high-vacuum insulation panel

  • Shu, Hung-Shan (Department of Civil Engineering, Chinese Military Academy) ;
  • Wang, Yang-Cheng (Department of Civil Engineering, Chinese Military Academy)
  • 발행 : 2000.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The objective of this study is to analyze the deformational characteristics of a high-vacuum insulation panel that is evacuated to eliminate significant gas-phase conductance through its thickness. The panel is composed of a metal envelope and low thermal conductance spacers. The problem is very challenging because several nonlinearities are involved concurrently. Not only are various finite element models such as triangular, rectangular, beam and circular plate models used to simulate the panel, but also several finite element programs are used to solve the problem based on the characteristics of the finite element model. The numerical results indicate that the effect of the diameter of the spacer on the vertical deformation of the plate panel is negligibly small. The parameter that mainly influences the maximum sag is the spacing between the spacers. The maximum vertical deformation of the panel can be predicted for a practical range of the spacing between the spacers and the thickness of the plate. Compared with the numerical results obtained by the finite element models and the experimental tests, they have a good agreement. The results are represented in both tabular and graphical forms. In order to make the results useful, a curve fitting technique has been applied to predict the maximum deformation of the panel with various parameters. Moreover, the panel was suggested to be a "smart" structure based on thermal effect.

키워드

참고문헌

  1. Bathe, K.-J. (1982), Finite Element Procedures in Engineering Analysis, Prentice-Hill, Inc.
  2. Hua, C.-H. and Wang, Y.-C. (1997), "Element type effects on stability analysis of plates", Proceedings of 1997 ANSYS User Conference, Nov. 4-5, Taiwan, No.4, 1-10.
  3. Shu, H-S., Wang, Y.-C. and Wei, C. (1997), "Modelling of thin plates under uniform pressure with boundary nonlinear condition", Proceedings of the Fourth Military Academy Symposium on Fudamental Science, Taiwan, 1175-1184.
  4. Ugural, A.C. (1981), Stresses in Plates and Shells, McGraw-Hill Book Company.
  5. Vlahinos, A.S., Ermopoulos, J.C.H. and Wang, Y.-C. (1991), "Buckling analysis of trapezoidal thin plates", Proceedings of 1st National Conference on Steel Structures, Athens, Greece, June 6-7, 98-110.
  6. Wang, Y.-C. and Vlahinos, A.S. (1995), "Response of thin plates under pressure and hexagonal support pattern", Proceedings of the Eighth Pacific Conference on NDT, Taiwan December, 695-702.
  7. Wei, C. and Wang, Y-C. (1995), "Modelling of compact vacuum insulators", Chinese Military Academy Journal, 30(2), 261-270.