비파괴검사학회지 (Journal of the Korean Society for Nondestructive Testing)
- 제20권3호
- /
- Pages.213-220
- /
- 2000
- /
- 1225-7842(pISSN)
- /
- 2287-402X(eISSN)
광탄성프린지 위상이동법을 이용한 에지균열판의 응력 해석
Stress Analysis of an Edge-Cracked Plate by using Photoelastic Fringe Phase Shifting Method
- Baek, Tae-Hyun (School of Mechanical Engineering, Kunsan National Univ.) ;
- Kim, Myung-Soo ;
- Cho, Sung-Ho
- 발행 : 2000.06.30
초록
광탄성법은 투명한 물체에 힘을 가하면 복굴절 현상이 나타나며, 편광기에 의해 등색 및 등경프린지가 나타난다. 등색프린지를 이용하여 주응력차이 또는 평면상 전단응력을 계산할 수 있으며, 등경프린지에 의해 주응력 방향을 결정할 수 있다. 재래식 광탄성법에서는 특정한 위치에서 프린지를 개별적으로 측정해야 되는 불편한 점이 있어, 디지털 영상처리에 의해 광탄성 프린지로부터 전체적인 응력장을 해석할 수 있도록 프린지이동에 의한 위상이동법이 개발되었다. 프린지 위상이동법은 원형편광기에서 검광자를
The method of photoelasticity allows one to obtain principal stress differences and principal stress directions in a photoelastic model. In the classical approach, the photoelastic parameters are measured manually point by point. The previous methods require much time and skill in the identification and measurement of photoelastic data. Fringe phase shifting method has been recently developed and widely used to measure and analyze fringe data in photo-mechanics. This paper presents the test results of photoelastic fringe phase shifting technique for the stress analysis of a circular disk under compression and an edge-cracked plate subjected to tensile load. The technique used here requires four phase stepped photoelastic images obtained from a circular polariscope by rotating the analyzer at
키워드