초록
우수한 성능을 가지며 소형${\cdot}$경량인 무선통신기기를 구현하기 위해서는 GHz 대의 고주파수에서 동작하는 소형 RF chip 인덕터의 개발은 중요한 연구분야가 되어왔다. 또한 최근 많이 사용되는 자성 ferrite core 재료는 300MHz 이상의 주파수영역에서 자화율이 급속하게 감소하여 고성능 RF chip 인덕터 개발에 큰 장애가 되고 있다. 따라서 본 논문에서는 비정질 $Al_2O_3$ 코아 재료를 응용한 단순 solenoid 형태의 소형${\cdot}$고성능 RF chip 인덕터를 연구하였다. Cu를 코일 (직경=40${\mu}m$)로 사용하였고 인덕터 크기는 $2.1mm{\times}1.5mm{\times}1.0mm$였다. 외부 전류원은 코일의 양단을 코아 가장자리에 적층된 Au 막에 본딩시킨 후 인가되었다. 코아의 성분은 EDX를 사용하여 분석하였다 개발된 인덕터의 인덕턴스 (L), quality factor (Q), 인피던스(Z)등의 주파수 특성은 RF impedance/Material Analyzer (HP16193A test fixture가 장착된 HP4291B)로 측정되었다. 인덕터들의 인덕턴스 값은 22 nH ~ 150 nH 범위를 가지며, 이들의 자기공진주파수 (SRF)는 1~3.5GHz 영역을 나타낸다. 또한 자기공진주파수가 증가함에 따라 인덕턴스 값이 감소하는 경향을 보이고 있다. 임피던스는 공진주파수에서 최대 값을 가지며 Q-factor의 값은 500 MHz ~ 1.5 GHz 주파수 범위에서 최대 70~97까지 얻어졌다.
Recently, there is a growing need to develope small-size RF chip inductors operating to GHz to realize high-performance, micro-fabricated wireless communication products. For the development of high-performance RF chip inductors, however, the ferrite-based chip inductors can not be used above 300MHz due to the limitation of the permeability of this material. In this work, small-size, high-performance RF chip inductors utilizing amorphous $Al_2O_3$ core material were investigated. Copper (Cu) with 40${\mu}m$ diameter was used as the coils and the chip inductor size fabricated in this work is $2.1mm{\times}1.5mm{\times}1.0mm$. The external current source was applied after bonding Cu coil leads to gold pads electro-plated on the bottom edges of a core material. The composition of core materials was measured using a EDX. High frequency characteristics of the inductance (L), quality factor (Q), and impedance (Z) of developed inductors were measured using an RF Impedance/Material Analyzer (HP4291B with HP16193A test fixture). The developed inductors have the self-resonant frequency (SRF) of 1 to 3.5 GHz and exhibit L of 22 to 150 nH. The L of the inductors decreases with increasing the SRF. The Z of the inductors has the maximum value at the SRF and the inductors have the quality factor of 70 to 97 in the frequency range of 500 MHz to 1.5 GHz.