A new Method of Stiction Reduction for MEMS Structures Using DDMS

DDMS를 이용한 MEMS 구조물의 새로운 점착방지 방법

  • Kim, Bong-Hwan (School of Electrical Engineering, College of Engineering, Seoul National University) ;
  • Oh, Chang-Hoon (School of Electrical Engineering, College of Engineering, Seoul National University) ;
  • Chun, Kuk-Jin (School of Electrical Engineering, College of Engineering, Seoul National University) ;
  • Oh, Yong-Soo (Microsystems Lab., S&C sector, SAMSUNG Advanced Institute of Technology(SAIT))
  • Published : 2000.06.01

Abstract

In order to achieve stiction-free polysilicon surfaces, we have suggested a new class of chemical coating precursors and confirmed their excellent characteristics. The strategy is to adopt dialkyldichlorosilanes (DDS, $R2SiCl_2$) instead of monoalkyltrichlorosilanes (MTS, $RSiCl_3$) such as octadecyltrichlorosilane (OTS) or 1H,1H2H,2H-perfluorodecyltrichlorosilane (FDTS). Dichlorodimethylsilane (DDMS, $(CH_3)2SiCl_2$) in this study is commercially available DDS with two short chains. DDMS in aprotic media spontaneously deposits on the hydrophilic polysilicon surface, which is completely changed to hydrophobic one. When polysilicon surface is exposed to DDMS solution at room temperature, anti-stiction property and hydrophobicity are clearly comparable to FDTS. DDMS is even superior to MTS in reliability and easy handling, which provides high yield. Since interactions among precursor molecules are reduced, conglomeration both in homogeneous solution and on surface can be effectively avoided. Even the cantilevers of 3 mm in length can be protected successfully from the stiction and the final quality of the modified surfaces is much less dependent on temperature. And no difference was found between the processes in ambient environment and in dry box. In addition, DDMS has advantages of remarkably reduced process time and low cost.

본 논문은 다결정실리콘의 점착방지를 위한 새로운 화학적 방법에 의한 코팅방법을 제시하였고 그 특성을 확인하였다. 이 코팅방법은 최근에 사용되어지고 있는 Octadecyltrichlorosilane (OTS) 나 1H,1H2H,2H-perfluorodecyltrichlorosilane (FDTS) 같은 Monoalkyltrichlorosilanes (MTS, $RSiCl_3$) 계열의 물질 대신에 Dialkyldichlorosilanes (DDS, $R2SiCl_2$) 계열의 물질을 이용하여 다결정실리콘의 표면을 바꾸는 방법이다. 이 DDS 계열의 화학물질 중에서 Dichlorodimethylsilane (DDMS, $(CH_3)2SiCl_2$)는 쉽게 구할 수 있고 다결정실리콘의 표면을 친수성에서 소수성으로 간단하고 빠른 방법으로 바꿀 수 있는 장점이 있다. 본 논문에서는 DDMS 코팅된 다결정실리콘으로 만들어진 외팔보를 3 mm길이까지 제작하여 점착현상이 전혀 일어나지 않았음을 확인하였고 이를 실제 구조물에 적용하였다.

Keywords

References

  1. R. Maboudian and R. T. Howe, 'Critical Review: Adhesion in surface micromechanical structures,' J. Vac. Sci. Technol. 1997, B 15, pp1-3 https://doi.org/10.1116/1.589247
  2. Gregory T. Mulhern, David S. Soane, and Roger T. Howe, 'Supercritical Carbon Dioxide Drying of Microstructures,' The 7th International Conference on Solid-state Sensors and Actuators, pp296-298
  3. Y.-I. Lee, K.-H. Park, J. Lee, C.-S. Lee, H. - J. Yoo, CJ Kim, and Y.-S. Yoon, 'Dry Release for Surface Micromachining with HF Vapor-Phase Etching,' J. MEMS, vol. 6, No. 3, September 1997, pp226-233 https://doi.org/10.1109/84.623111
  4. ?Y. Yee, K Chun, D. Lee, and C. Kim, 'Polysilicon surface-modification technique to reduce sticking of microstructures,' Sensors and Actuators, Vol. A-52. pp145 150, 1996
  5. Y. Yee, M Park. and K. Chun, 'A Stiction Model of Suspended Polysilicon Microstructure Including Residual Stress Gradient and Postrelease Temperature,' J. MEMS. vol.7, no.3, September 1998, pp339-344
  6. M. R. Houston, R. Maboudian and R. T. Howe, J. App. Phys. 78, 3801 (1995) https://doi.org/10.1063/1.359894
  7. R. M. Wallace, et al., J. Vac. Sci. Technol. A 13, 1345 (1995) https://doi.org/10.1116/1.579562
  8. Piu Francis Man, Bishnu P. Gogoi, and Carlos H. Mastrangelo, 'Elimination of Post-Release Adhesion in Microstructures Using Conformal Fluorocarbon Coatings,' J. MEMS, vol. 6, No. 1, March 1997, pp25-34
  9. M. R. Houston, R. Maboudian and R. T. Howe, Proc. IEEE. Solid State Sensor and Actuator Workshop, Hilton Head, SC, USA, 1996, 42
  10. P. Clchet, et al., Sensors and Actuator A 44, 77 (1994) https://doi.org/10.1016/0924-4247(94)00777-2
  11. U. Srinivasan, M. R. Houston, R. T. Howe and R. Maboudian, 'Self-Assembled Fluorocarbon Films for enhanced stiction Reduction', Transducers 97, pp1399-1402 https://doi.org/10.1109/SENSOR.1997.635499
  12. U. Srinivasan, M. R. Houston, R. T. Howe and R. Maboudian, 'Alkyltrichlorosilane-Based Self-Assembled Monolayer Films for Stiction Reduction in Silicon Micromachines', J. MEMS, vol. 7, No. 2, June 1998, pp252-260 https://doi.org/10.1109/84.679393
  13. A N. Parikh, D. L. Allara, I. B. Azouz and F. Rodelez, 'An Intrinsic Relationship between Molecular Structure in Self-Assembled n-Alkylsiloxane Monolayers and Deposition Temperature', J. Phys. Chem. vol. 98, pp.7577-7590 https://doi.org/10.1021/j100082a031
  14. J. B. Brzoska, I. B. Azouz and F. Rodelez, 'Silanization of Solid Substrates: A Step toward Reproducibility', Langmuir, vol. 10, pp.4367-4373, 1994 https://doi.org/10.1021/la00023a072
  15. B. Kim, C. Oh, K. Chun, T. Chung, J. Byun, and Y. Lee 'A new class of surface modifiers for stiction reduction', IEEE international workshop on MEMS, pp189 193, 1999 https://doi.org/10.1109/MEMSYS.1999.746804
  16. 김서규, 전국진, 'A mechanically decoupled gyroscope array', 제1회 MEMS 학술대회, 서울, 1999, pp233-239