The Transactions of the Korean Institute of Electrical Engineers D (대한전기학회논문지:시스템및제어부문D)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Fault Diagnosis for a System Using Classified Pattern and Neural Networks

분류패턴과 신경망을 이용한 시스템의 고장진단

  • Published : 2000.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Using neural network approach, the diagnosis of faults in industrial process that requires observing multiple data simultaneously are studied. Two-stage diagnosis is proposed to analyze system faults. By using neural network, the first stage detects the dynamic trend of each normalized date patterns by comparing a proposed pattern. Instead of using neural network, the difference between stored fault pattern and real time data is used for fault diagnosis in the second stage. This method reduces the amount of calculation and saves storing space. Also, we dealt with unknown faults by normalizing the data and calculating the difference between the value of steady state and the data in case of fault. A model of tank reactor is given to verify that the proposed method is useful and effective to noise.

Keywords

References

  1. 이기상, '고장검출진단 및 고장허용제어의 개념과 동향', 전기학회지, VOL. 48, No. 4, 1999
  2. Moharned El Hachemi Benbouzid, 'Induction Motors' Faults Detection and Localization Using Stator Current Advanced Signal Processing Technique' IEEE trans. on Power Electronics, VOL. 14, No. 1, pp. 14-22, 1999 https://doi.org/10.1109/63.737588
  3. Richard Dorr and Frederic Kratz, 'Detection, Isolation, and Identification of Sensor Faults in Nuclear Power Plants', IEEE trans. on Control System Technology, VOL. 5, No. 1, pp. 42-60 https://doi.org/10.1109/87.553664
  4. Jacek M. Jurada, Introduction to Artificial Neural Systems, PWS, pp. 163-206, 1992
  5. Kumpati S. Narendra and Kannan Parthasarathy 'Identification and Control of Dynamical systems Using Neural Networks', IEEE trans. on Neural Networks, VOL.1, No. 1, pp. 4-27, 1990 https://doi.org/10.1109/72.80202
  6. Yunesuke Maki and Kenneth A Laparo, 'A Neural-Network Approach to Fault Detection and Diagnosis in Industrial Process', IEEE Trans. on Control Systems, VOL. 5, No 6, pp 529-541, 1997 https://doi.org/10.1109/87.641399
  7. Luyben, Process, Modeling, Simulation, and Control for Chemical Engineers 2nd Edition, McGraw-Hill, 1989
  8. Ray, Advanced Process Control, McGraw-Hill, 1981