The Transactions of the Korean Institute of Electrical Engineers B (대한전기학회논문지:전기기기및에너지변환시스템부문B)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Circuit Parameters and Characteristic Analysis of Condenser Run Single Phase Induction Motor by Combine Equivalent Circuit with Numerical Method

등가회로법과 수치해석의 결합에 의한 콘덴서 구동형 단상 유도전동기의 회로정수 산정 및 특성해석

  • Published : 2000.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes the calculation of the equivalent circuit parameters and the characteristic analysis of a capacitor-run type single-phase induction motor by means of the finite element method in coupled with the conventional equivalent circuit model. The circuit parameters of the stator are calculated form the lumped parameter and the slot leakage reactance of the rotor with the closed slot can be obtained by the use of slot pitch boundary condition. From the analysis result this combined equivalent circuit and finite element method which is used slot pitch boundary condition is compared with the experimental results, the validity of the method is proved.

Keywords

References

  1. 三宅 博, 小形ACモ―タの 設計と 制御~BASICからCADまで-, 總合電子出版社, 1981
  2. Cyril G. Veinott, Theory and Design of Small Induction Motors, McGRAW-HILL BOOK COMPANY, INC., 1959
  3. T. A. Lipo, Introduction to AC Machine Design Vol. 1, Wisconsin Power Electronics Research Center University of Wisconsin, 1996
  4. 系見 和信, 實用モ―タ 設計 マニュアル, 總合電子リ―チ, 1992
  5. 윤상백, 홍정표, '콘덴서 구동형 단상유도전동기의 등가회로 구성 및 특성해석', 전기학회 논문지 제45권 9호, pp. 1247-1254, 1996. 9
  6. S. J. SALON, Finite Element Analysis of Electrical Machines, KLUWER ACADEMIC PUBLISHERS, 1995
  7. S. Williamson and M. J. Robinson, 'Calculation of cage induction motor equivalent circuit parameters using finite elements,' IEE Proc.-B, Vol. 138, No. 5, pp. 264-276, , Sep. 1991
  8. S. Williamson, M. J. Robinson and L. H. Lim, 'Finite element models for cage induction motor analysis,' IEEE Trans. on Indus. Appl, Vol. 26, No. 6, pp. 1007-1017, Nov. 1990 https://doi.org/10.1109/28.62370
  9. S. Williamson, M. J. Robinson and M. C. Begg, 'Calculation of the bar resistance and leakage reactance of cage rotors with closed slots,' IEEE Proc-B, Vol. 132, No. 3, pp. 125-132, , May 1985
  10. 하경호, 홍정표, 김규탁, 임태빈, '엔드링을 고려한 농형 유도전동기의 2차원 유한요소해석', 전기학회 논문지, 제48권 B-2호, pp. 49-56, 1999. 2