대한전기학회논문지:전기기기및에너지변환시스템부문B (The Transactions of the Korean Institute of Electrical Engineers B)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

3레벨 인버터로 구동되는 유도전동기 직접토크제어의 저속성능 개선

An Improvement on low Speed Operation Performances of DTC for 3-level Inverter-fed Induction Motors

  • 이교범 (고려대 전기공학과) ;
  • 송중호 (한국과학기술연구원 지능제어연구센터) ;
  • 최익 (한국과학기술연구원 지능제어연구센터) ;
  • 김광배 (한국과학기술연구원 지능제어연구센터) ;
  • 유지윤 (고려대 전기.전자.전파공학부)
  • 발행 : 2000.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A direct torque control algorithm for 3-level inverter-fed induction motors is presented. Conventional voltage selection methods provoke some problems such as stator flux drooping phenomenon and undersirable torque control appeared especially at the low speed operation. To overcome these problems, a proposed method uses intermediate voltage vectors, which are inherently generated in 3-level inverters. In the proposed algorithm, both subdivision of the basic switching sectors and applications of tntermediated voltages improve the low speed operation characteristics. This algorithm basically considers applications in which direct torque controlled induction motors are fed by 3-level inverters with low switching frequency around 500Hz. An adaptive observer is also employed to bring better responses at the low speed operation, by estimating some state-variables, motor speed and motor parameters which take a deep effect on the performance of the low speed operation. Simulation and experiment results verify effectiveness of the proposed algorithm.

키워드

참고문헌

  1. G. Buja, D. Casadei and G. Serra,'Direct Stator Flux and Torque control of an Induction Motor: Theoretical Analysis and Experimental Results,' IECON'98, pp. T50-T64, 1998 https://doi.org/10.1109/IECON.1998.723933
  2. James N. Nash, 'Direct Torque control, Induction Motor Vector Control without and Encoder,'IEEE Trans. Indus. Appli.,vol. 33, no. 2, pp. 333-341, March/April, 1997 https://doi.org/10.1109/28.567792
  3. P. Vas, W. Drury and A. F. Stronach, 'Present and Future of Drives, Sensorless and Artificial Intelligence Application,' EPE'97, pp. 4.573-4.578, 1997
  4. F. Busschots, B. Renier and R. Belmans, 'Direct Torque Control: Application to Crane Drives,' EPE'97, pp. 4.579-4.584, 1997
  5. Sohail Malik, and Dieter Kluge, 'ACS 1000-world's first standard AC drive for medium-voltage application,' ABB Review, pp. 4-11, 1998
  6. P. K. Steimer, J. K. Steinke and H. E. Gruning, 'A reliable interface-friendly Medium Voltage Drive based on the robust IGCT and DTC technologies,' IAS'99, pp. 1505-1512, 1999 https://doi.org/10.1109/IAS.1999.80594
  7. CG Mei, SK Panda, JX Xu and KW Lim,' Direct Torque Control of Induction Motor-Variable Switching Sectors,' PEDS'99, pp. 80-85, 1999 https://doi.org/10.1109/PEDS.1999.794540
  8. D. Alfonso, G. Gianluca, M. Ignazio and Perfetto Aldo, 'An Improved Look-up table for Zero Speed Control in DTC Drives,' EPE'99, 1999
  9. Y. A. Chapuis, T. Kosaka and N. Matsui, 'Performance Improvement in start up Condition for DSP-Based Direct Torque Control of an Induction Machine,' IPEC-Tokyo 2000, pp. 1189-1194, 2000
  10. H. Kubota, and K. Matsuse, 'Speed Sensorless Field-Oriented Control of Induction Motor with Rotor Resistance Adaptation,' IEEE Trans. Indus. Appli., vol. 30, no. 5, pp. 1219-1224, Sep./Oct., 1994 https://doi.org/10.1109/28.315232