참고문헌
- Hardt, D., et al., 1997, Next-Generation Manufacturing (NGM) Project, Agility Forum and Leaders for Manufactring, Bethlehem, PA., 1997
- Koren, Y., Ulsoy, A.G., Reconfigurable Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems(ERC/RMS) Report #1, The University of Michigan, Ann Arbor, MI, 1997
- Matta, M., Tolio, T., Flexible and productive manufacturing system architecture. The 15th Int. Conf. on Production Research, August. Limerick, Ireland, 1999
- Ulsoy, A.G. and Heytler, P., A Survey of Flexible and Reconfigurable Manufacturing Systems, Report #11, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS), The University of Michigan, Ann Arbor, MI., 1998
- Koren, Y., Jovane, F., and G. Pritschow (Eds.), Open Architecture Control Systems, Summary of Global Activity, ITIA Series, Vol. 2, 1998
- Mehrabi, M.G., Ulsoy, A.G., State-of-the Art in Reconfigurable Manufacturing Systems, Report #2, Vol. 1 and Vol.11, Engineering Research Center for Reconfgurable Machining Systems(ERC/RMS), The University of Michigan, Ann Arbor, 1997
- Aronson, R.B., Operation Plug-and-Play is on the Way, Manufacturing Engineering, pp. 108-112, 1997
- AMT (Association for Manufacturing Technology) Report, A Technology Road Map for the Machine-Tool Industry, 1996
- Ashley, S., Manufacturing Firms Face the Future, Mechanical Engineering, pp. 70-74, 1997
- Garro, O., Martin, P., Towards New Architecture of Machine Tools, Int. J. Prod. Research, Vol. 10, No. 10, pp. 2403-2414, 1993 https://doi.org/10.1080/00207549308956865
- Rogers, G.G., Bottaci, L., Modular Production Sustems: A New Manufacturing Paradigm, Journal of Intelligent Manufacturing, Vol. 8, pp. 147-156, 1997 https://doi.org/10.1023/A:1018560922013
- Koren, Y., Computer Control of Manufacturing Systems, McGraw-Hill, New York, NY. Chapter 10, 1983
- Atkins, W.S. Management Consultants, Strategic Study on the EU Machine Tool Sector, 1990
- Heisel, U., Michaelis, M., Rekonfigurierbare Werkzeugmaschinen. In: Zeitschrift fuer wirtschaftlichen Fabrikbetrieb ZwF 93, (10/1998), pp. 506-507, 1998
- Pritschow, G., Daniel, Ch., Junghans, W., Sperling, W., Open System Controllers - A Challenge for the Future of the Machine Tool Industry, Annals of the CIRP, Vol. 42/1, pp. 449-452, 1993
- Van Brussel, H., Braembussche, P.V., Robust Control of Feed Drives with Linear Motors, CIRP Annals, Vol. 47/1, pp. 325-328, 1998 https://doi.org/10.1016/S0007-8506(07)62843-1
- Koren, Y., Kota, S., Reconfigurable Machine Tools, U.S. Patent, 1999
- Paresis, C. et al., A Rapidly Deployable Manipulator System, Proc. IEEE ICRA, pp. 1434-1439, 1996
- Fukuda, T., Ueyama, T., Autonomous Behavior and Control : IEEE Proc. ICRA, 1993
- IMS Report, Joint International Research Programs into an Intelligent Manufacturing System, International Robotics and Factory Automation Centre (IROFA), 1990
- Bollinger, J. et al., Visionary Manufacturing Challenges for 2020, National Research Council Report, National Academy Press, Washington, D.C., 1998
- Lee, G.H., Reconfigurability Considerations in the Design of Components and Manufacturing Systems, International Journal of Advanced Manufacturing Technology, Vol. 13, No. 5, pp. 376-386, 1997 https://doi.org/10.1007/BF01178258
- Thielemans, H. et al., HEDRA, Heterogeneous Distributed Real-time Architecture, Control Engineering Practice, Vol. 4, No. 2, pp. 187-193, 1996 https://doi.org/10.1016/0967-0661(95)00225-1
- Heisel, U., Maier, V., Lunz, E., Auslegung von Maschinenstrukturen mit Gelenkstab- Kinematik, In: wt Werkstattstechnik Vol. 88, Nr. 4, pp. 183-186, 1998
- Mehrabi, M.G., Ulsoy, A.G., Koren, Y., Heytler, P., Future Trends in Manufacturing: A Survey of Flexible and Reconfigurable Manufacturing Systems, submitted to J, of Manufacturing Systems, 1998
- Eversheim, W., Organisation in der Produktionstechnik, Band 4: Fertigung und Montage, Diisseldorf: VDI-Verlag, 1989
- Sethi, A.K., Sethi, S.P., Flexibility in manufacturing: a survey, Int. J. Of Flexible Manufacturing Systems, (2), pp. 289-328, 1990 https://doi.org/10.1007/BF00186471
- Grieco, A., Semeraro, O., Tolio, T., Toma, S., Simulation of tool and part flow in FMSs, International Journal of Production Research, Vol. 33, No. 3, pp. 643-658, 1995 https://doi.org/10.1080/00207549508930171
- Chryssolouris, G., Flexibility and its measurement, Annals of the CIRP, Vol. 45/2, pp. 581-587, 1996
- Koren, Y., Hu, S.J., Weber, T.W., Impact of Manufacturing System Configuration on Performance, Annals of the CIRP, Vol. 47/1, pp. 369-372, 1998 https://doi.org/10.1016/S0007-8506(07)62853-4
- Tolio, T., A. Matta, A method for performance evaluation of automated flow lines, Annals of the CIRP, Vol. 47/1, 1998 https://doi.org/10.1016/S0007-8506(07)62854-6
- Nemeth, I., Fisette, P., and Van Brussel, H., Conceptual design of 3-axis machine tools, Proc. 32nd CIRP Int. Sem. on Man. Syst., K. U. Leuven, ISBN 90-73802-68-7, pp. 239-248, 1999
- Tonshoff, H.K., Menzel, E., Hinkenhuis, H. and Nitidem, E., 1994, Intelligence in Machine Tools by Configuration 7th Int. Conference on Production / Precision Engineering, 4th Int. Conference on High Technology, 15-17 September 1994, Chiba, Japan Chiba 1994
- Erixon, G., Modularity - the basis for Product and Factory Re-engineering, Annals of the CIRP, Vol. 45/1, pp. 1-4, 1996 https://doi.org/10.1016/S0007-8506(07)63005-4
- Pasek, Z.J., et al., OpenFront: System Level Software for Configuration and Control of Manufacturing Systems, Engineering Research Center for Reconfigurable Machining Systems (ERC/RMS) Report #21, The University of Michigan, Ann Arbor, MI
- Shamoto, E., Moriwaki, T., Rigid XY Table for Ultraprecision Machine Tool Driven by Means of Waling Drive, Annals of the CIRP, Vol. 46/1, pp. 301-304, 1997 https://doi.org/10.1016/S0007-8506(07)60830-0
- Heisel, U., Feinauer, A., Rudlaff, Th., Forderung an Hochgeschwindigkeits maschimen. wt-Prodktion und Management, Nr. 85, pp. 155-161, 1995
- Pritschow, F., et al., 1998, Research and Development in the Field of Parallel Kinematics Systems in Europe, First European-American forum on Parallel Kinematics Machines:Theoretical Aspects and Industrial Requirements, September, Milano, Italy. To be published by Springer & Verlag in 1999
- Heisel, U., Precision Requirements of Hexapod Machines and Investigation Results, First European-American forum on Parallel Kinematics Machines, Milano, 31-Aug.-1, Sept., 1998
- Hissser, D., In der Werkzeug maschinentechnik bricht eire nerve Aera an, findustrie Anzeiger, Vol. 22, pp. 38-41, 1997
- Weck, M., Giesler, A., Meylahn, A., Stainer, D., Parallel Kinematics - The Importance of Enabling Technologies, In: First European-American forum on Parallel Kinematics Machines, Milano, 31.-Aug. 1. Sept. 1998
- Kota, S., Design of Reconfigurable Machine Tools, Proceedings of the CIRP International Seminar on Manufacturing Systems, Leuven, Belgium, May 24-26, 1999
- Pritschow, G., et. al., Modular System Platform for Open Control Systems, Production Engineering Vol. 4, No. 2, 1997
- Lutz, R. et.al., Konfigurierungs werkzeuge fur offene Steuerungen, Innovation durch Technik und Organisation, Berlin: Springer, 1997
- Koren, Y., Pasek, Z.J., Ulsoy, A.G., Benchetrit, U., 1996, Real-Time Open Control Architectures and system performance, Annals of the CIRP, Vol. 45/1, pp. 377-380 https://doi.org/10.1016/S0007-8506(07)63084-4
- Sperling, W. et al., 'OSACA ESPRIT 6379/9115 Final Report,' FISW GmbH, Stuttgart, Germany, 1996
- HOMNOS, AbschluRbericht, VDW Forchungsberichet, Frankfurt, 19998
- Spath, D., Mussa, S., ACCOMAT - Die genauigkeitsgeregelte Maschine, Wt Werkstaustechnik 89 Vol. 5, pp. 235-238, 1999
- Hu, S.J., Steam of Variation Theory for Automotive Body Assembly, Annals of the CIRP, Vol. 46/1, pp. 1-4, 1997 https://doi.org/10.1016/S0007-8506(07)60763-X
- Boer, C.R., Jovane, F., Towards a New Model of Sustainable Production: Manufuturing, Annals of the CIRP, Vol. 45/1, 1996 https://doi.org/10.1016/S0007-8506(07)63093-5
- Jovane, F., Concepts for Strategic Machinery Innovation, Initial Meeting of ARMMS Networks, Bruselles - December, 1998
- Annals of the CIRP v.45 no.1 Towards a New Model of Sustainable Production: Manufuturing Boer,C.R.;Jovane,F.
- Initial Meeting of ARMMS Networks Concepts for Strategic Machinery Innovation Jovane,F.