A Development of a Transient Hydrogen Generation Model for Metal-Water Interactions

  • Published : 2000.12.01

Abstract

A transient model for hydrogen generation in molten metal-water interactions was developed with separate models for two stages of coarse mixing and stratification. The model selves the mechanistic equations (heat and mass transfer correlation, heat conduction equation and the concentration diffusion equation) of each stage with non-zero boundary conditions. Using this model, numerical simulations were performed for single droplet experiments in the Argonne National Laboratory tests and for FITS tests that simulated dynamic fragmentation and stratification. The calculation results of hydrogen generation showed better agreement to the experiment data than those of previous works. It was found from the analyses that the steam concentration to be reached at the reaction front might be the main constraint to the extent of the metal droplet oxidized. Also, the hydrogen generation rate in the coarse mixing stage was the higher than that in the stratification stage. The particle size was the most important factor in the coarse mixing stage to predict the amount of hydrogen generation.

Keywords

References

  1. L. Baker, Jr. and L.C. Just, Studies of the Metal-Water Reactions at High Temperatures III-Experimental and Theoretical Studies of the Zirconium-Water Reaction,' ANL-6548, Argonne National Laboratory, Argonne, IL (1962)
  2. M. Epstein, J.C. Leung, G.H. Hauser, R.E. Henry, L. Baker, Jr., 'Film Boiling on a Reactive Surface,' Int'l. J. Heat and Mass Transfer, 27, 1365-1378 (1984) https://doi.org/10.1016/0017-9310(84)90064-4
  3. M.L. Corradini, D.E. Mitchell and N.A. Evans, 'Hydrogen Generation During a Core Melt-Coolant Interaction,' SAND83-0779C, Sandia National Laboratory (1979)
  4. M.F. Young and M. Bermann, 'Hydrogen Generation During Fuel-Coolant Interactions,' American Chemical Society National Meeting (1986)
  5. A. Uludogan and M. L. Corradini, ' Modeling of Molten Metal/Water Interaction,' Nuclear Technology, 109, 171-186 (1995)
  6. B.C. Lee and G.C. Park, 'Development of a Mechanistic Model for Hydrogen in Fuel-Coolant Interactions,' Journal of the Korean Nuclear Society, 29, 99-109 (1997)
  7. D.E. Mitchell, M.L. Corradini and W.W. Tarbell, 'Intermediate-Scale Steam Explosion Phenomena: Experiments and Analysis,' SAND81-1234, NUREG/CR-2145, Sandia National Laboratories (1981)
  8. C.C. Chu, M.L. Corradini, 'One-Dimensional Transient Model for Fuel-Coolant Fragmentation and Mixing,' Proc. Int'l Mtg. on Thermal Reactor Safety, San Diego CA (1986)
  9. R.E. Henry and H.K. Fauske, 'Core Melt Progression and the Attainment of a Permanently Coolable State,' Proc. Of Thermal Reactor Fuels Mtg., SunValley, ID (1981)
  10. R.E. Henry and H.K. Fauske, 'Required Initial Conditions for Energetic Steam Explosion,' Fuel-Coolant Interactions, ASME HTD, 19, Washington, D.C. (1981)
  11. M.L. Corradini, 'Proposed Model for Fuel-Coolant Mixing During a Core Melt Accident,' Proc. Int'l Mtg. On Thermal Reactor Safety, NUREG/CP-0027 (1982)
  12. V.K. Dhir and G.P. Purohit, 'Subcooled Film-Boiling Heat Transfer from Shperes,' Nuclear Engineering and Design, 47, 48-66 (1978) https://doi.org/10.1016/0029-5493(78)90004-3
  13. R.B. Bird et al., 'Transport Phenomena,' p.646, John Wiley & Sons (1960)
  14. P.J. Berenson, ' Film-Boiling Heat Transfer from a Horizontal Surface,' Journal of Heat Transfer, 83, 351 (1961)
  15. O. Levenspiel, 'Chemical Reaction Engineering,' Wiley, New York (1962)
  16. L. V. Gurvich et al., 'Handbook of the Thermodynamic Properties of Individual Substances,' Vol..4, Nauka, Moscow (1982)