Theoretical Development and Design Aids for Expansion Joint Spacings

  • Lee, Hong-Jae (Dept. of Architectural Engineering. Chung-Ang University) ;
  • Lee, Cha-Don (Dept. of Architectural Engineering. Chung-Ang University)
  • 발행 : 2000.01.01

초록

It has been a well known fact that buildings having inappropriate expansion joints in their spacings may be subject to exterior damages due to extensive cracks on the outer walls under service loads and structural damages due to excessive moment induced by temperature changes at ultimate load conditions. Unfortunately, consistent code provisions are unavailable regarding spacings of expansion joints from different foreign structural codes. And a more serious problem is that no quantitative measurements on spacings is given in our codes for building structures. In order to establish a rational guideline on the spacing of expansion joints, theoretical approaches are taken in this study. The developed theoretical formula is, then, converted to a design chart for structural designers' convenience in its use. The chart considers both service and ultimate load stages.

키워드

참고문헌

  1. Designing for the Effect of Creep,Shrinkage,and Temperature in Concrete Institute Effect of Thermal Variations and Shrinkage on One Story Reinforced Concrete Buildings Martin,Ignacio;Acosta,Jose
  2. Technical Report No.65 Expansion Joints in Buildings
  3. ACI 224.3R-95,Buildings Ⅲ.4 Joints in Concrete Construction ACI Committee 224
  4. Geotechnique v.6 no.1 Stability of Strutted Excavation in Clay Bjerrum L.;Eide O.
  5. Structural Concrete Expansion Joint Billig Kurt
  6. Journal of the Institution of Engineers(India) v.59 Analysis of Long Concrete Buildings for Temperature and Shrinkage Effect Varyani V.H.;Radhaji A.
  7. Concrete Structures Design Code Department of Construction and Transportation
  8. Structurel Foundation Design Code Department of Construction and Transportation
  9. DIN 4114
  10. Building Movements and Joint