초록
초음파분무를 이용한 MOCVD법으로 강유전체 $PbTiO_3$박막을 Si(100) wafer와 ITO-coated glass위에 제조하였다 Si 기판 위에 증착된 박막으로부터, 출발원료의 농도비(Ti/Pb)가 1.2일 때, 단일 perovskite 상을 얻을 수 있었다. ITO-coated glass 위에 증착된 박막은 Si기판 위에 제조된 박막보다 박막의 성장속도가 더 빠르며, 기판온도를 $530^{\circ}C$부터 $570^{\circ}C$까지 증가시켰을 때, 결절성과 입자 크기의 증가에 의해 유전상수는 증가하였다. $570^{\circ}C$에서의 유전상수 및 유전손실 값은 각각 205, 0.016을 나타내었다. 기판온도가 $600^{\circ}C$ 이상인 경우, 유전상수가 감소되는 경향을 보였다.
Lead titanate thin films were fabricated on Si(100) wafer and ITO-coated glass substrates by metal organic chemical vapor deposition using ultrasonic spraying. When the ratio (Ti/Pb) of starting materials was 1.2, the films deposited on Si wafer had a single perovskite phase. The films deposited on ITO-coated glass had higher growth rate than that on Si wafer. As deposition temperature was increased from $530^{\circ}C$ to $570^{\circ}C$, dielectric constant was increased due to the increase of crystallinity and grain size. At $570^{\circ}C$, dielectric constant and dielectric loss of the films were 205 and 0.016, respectively. When the deposition temperature is higher than $600^{\circ}C$, dielectric constant was decreased.