그루브 압축이 알루미늄 집합조직에 미치는 영향

Effect of Groove Pressing on Deformation Texture in Aluminum

  • 발행 : 2000.08.01

초록

The present study has focused on the development of shear textures during groove pressing in an aluminum alloy sheet. The shear components 23 and 13 developed during the groove pressing process. The process consisting of two steps of grooving and flattening each effectively gave rise to a high shear deformation In the sheet without reduction in thickness. The main texture component obtained from the process was the rotated Bs-orientation. The evolution of shear components during the groove pressing caused an increase in R-value of aluminum sheet comparing to a normally processed rolled sheet.

키워드

참고문헌

  1. An Introduction Textures in Metals M. Hatherly;W. B. Hutchinson
  2. Acta Metall. v.36 Mechanism of Deformation and Development Rolling Textures in Polycrystalline F.C.C. Metals-Simulation and Interpretation of Experiments on the Basis of Taylor-Tape Theories J. Hirsch;K. Lucke
  3. Mat. Sci. Tech. v.6 W. B. Hutchinson;H.-E. Ekstrom
  4. Aluminum Alloys-contemporary Research and Applications (Treatise on Materials Science and Technology) v.31 A. K. Vasudevan;R. D. Doherty
  5. Proc. of 16th Riso International Symposium of Materials Science Microstructural and Crystallographic Aspects of Recrystallization T. Kamijo;H. Fukutomi
  6. 日本金屬學會誌 v.60 no.8 Microstructure and Texture of A1050 Aluminum Strips Produced by Melt Direct-Rolling Method Y. Nagai;N. Tsuji;T. Sakai;Y. Saito
  7. 日本金屬學會誌 v.60 no.11 J. Hu;K. Ikeda;T. Murakami
  8. 第174回 塑性加工ツソボジウム 左海哲夫
  9. 박사논문, 서울대학교 금속공학과 비대칭 압연한 알루미늄 합금판재의 집합조직 및 소성변형비 김근환
  10. Metal Forming and the Finite Element Method S. Kobayashi;S. I. Oh;T. Altan
  11. Elements of X-ray Diffraction B. D. Cullity
  12. Texture Analysis in Material Science Translated by P.R. Morris H. J. Bunge;P. R. Morris(translated.)
  13. Preferred Orientation in deformed Metals and Rocks S. Matthies;H.-R. Wenk;H.-R. Wenk(ed.)
  14. J. Inst. Metals v.63 G. L. Taylor
  15. Phil. Mag. v.42 J. F. Bishop;R. Hill
  16. Proc. ICOTOM 7 G. R. Canova;U. F. Kocks