초록
하이브리드 복합재료는 구조용으로 개발되어 여러 분야에서 응용되고 있으며, 특히 항공산업, 우주산업, 스포츠레저산업, 자동차산업 등에서 그 응용 분야를 확대하고 있다. 섬유 보강 고분자 복합재료는 비강도, 비강성이 높으며, 물리 화학적 성질, 동적 특성, 트라이볼로지 특성 등이 우수하여 고부가가치를 가지는 부품이나 성형물을 생산할 수 있다. 이러한 하이브리드 복합재료는 치차, 베어링, 캠, 씨일 등의 마찰부품으로도 사용가능성이 매우 높으며, 하이브리드 복합재료의 구조를 적절히 설계함으로써 일정한 하중에 견디며, 마찰마모특성이 뛰어난 바이오미메틱 재료로서 사용될 수 있다. 복합재료의 마찰 및 마모 특성을 규명하기 위하여 마찰 및 마모시험기를 설계하여 제작한 후 일방향 섬유복합재료의 마찰 및 마모 성질을 측정하였다. 탄소섬유, 아라미드섬유, 유리섬유 등이 포함된 일방향 복합재료의 트라이볼로지 특성을 규명하여 이를 바탕으로 최소마모율이 예상되는 하이브리드 복합재료의 구조를 제안하기 위하여 유리섬유복합재료, 탄소섬유 복합재료, 아라미드섬유 복합재료의 마찰 및 마모특성을 측정하였다. 그 결과 섬유복합재료의 마찰 및 마모성질은 섬유의 배향과 활주속도 및 보강섬유의 종류에 따라 변화함을 알았다. 각 시편에 대한 실험결과를 분석하여, 탄소섬유와 아라미드섬유가 하이브리드화 된 복합재료의 구조를 제안하고 그 시편을 제작하여 실험하였고 결과를 분석하였다.
Tribological properties of fiber composite materials were measured and wear resistant hybrid structure was proposed based upon the understanding of tribological behavior of the composite materials. Unidirectional composites with glass fibers, carbon fibers, and aramid fibers were tested for tribological properties in order to propose a wear resistant hybrid structure. Hybrid composites which contain carbon and aramid fibers were prepared, the specimens were sliced by a water-jet cutter, and friction and wear properties were measured. An experimental set-up was designed and built for the friction and wear test of the composite specimens. Unidirectional fiber composite and hybrid composite specimens were tested to evaluated the tribological behavior for biomimetic applications. It is observed that the friction and wear behavior of fiber composites depends upon fiber orientation, sliding speed, and type of reinforcing fibers.