Prediction of Laminate Composite Strength Using Probabilistic Approach

확률분포를 이용한 복합재료의 강도예측

  • 조영준 (서울대학교 섬유고분자공학과) ;
  • 강태진 (서울대학교 섬유고분자공학과) ;
  • 이경우 (동아대학교 의상섬유학부)
  • Published : 2000.02.01

Abstract

A numerical approach for predicting the ultimate strength of laminate composites has been studied using the Weibull distribution of the strengths of lamina plies. The probabilistic initial failure strengths of laminates were calculated using Tsai-Hill failure criterion. The ultimate strength of the laminate composites has been predicted using progressive failure analysis. The experimental results show that the strength prediction based on the Weibull distribution of ply strength reasonably agrees well with the experimentals better than equal strength assumption.

복합재료 적층판의 최종강도를 점증적 파손 해석방법을 사용하여 예측하였다. 플라이 강도를 확률분포로 가정했을 경우와 상수로 가정했을 경우 각각의 최종강도를 예측하였다. 복합재료의 강도에 대한 확률분포인 Weibull 분포를 이용하여 임의의 강도 값을 얻은 후 이 값을 Tsai-Hill 파손식에 대입하여 파손여부를 판정하고 파손이 일어나면 재료의 물성을 떨어뜨렸다. 이 방법에 의해서 얻어진 결과를 플라이의 강도를 상수로 가정하여 해석한 경우와의 차이에 대하여 고찰하였다. 결과적으로 두 경우 모두 실험치와 약간의 오차를 보였지만 파손의 경향성에 있어서는 확률분포를 이용한 강도해석이 실험값과 더 근사한 결과를 보였다.

Keywords

References

  1. 복합재료 역학 및 가공론 이대길
  2. The Behavior of Structures Composed of Composite Materials J. R. Vinson;R. L. Sierakowski
  3. Fiber-Reinforced Composites, Materials, Manufacturing and Design P. K. Mallick
  4. Mechanics of Composite Materials R. M. Jones
  5. Interlaminar Response of Composite Materials N. J. Pagano
  6. J. of composite materials v.15 Probabilistic Burst Strength of Filament-Wound Cylinders Under internal Pressure M. Uenura;H. Fukunaga
  7. J. of Composite Materials v.3 A Method of Predicting the Nonlinear Behavior of Laminated Composites P. H. Pepit;M. E. Waddoups
  8. Analysis and Performance of Fiber Composites, (2nd Ed.) Bhagwan D. Agarwal;Lawrence J. Broutman
  9. Fiber-Reinforced Composites : Materials, Manufacturings, and Design P. K. Mallick
  10. J. of Composite Materials v.21 Post-Failure Analyis of Bolted Composite Joints in Tension or Shear-Out Failure Chang, F.K.;Chang, K.Y.
  11. Proc. Royal Soc. Theory of the Yielding and Plastic Flow of Anisotropic Metals Hill, R.